I am surprised no one has answered this, must of have a non interest subject.
Other than the obvious, transmission and transfer case (if it is 4x4), clutch pedal assembly, with the master cylinder, and reservoir and the hose to the transmission slave cylinder. the computer if it is close to the right year and the correct engine size. Devise at the bottom of the clutch pedal a shaft that plugs into the wiring harness. (it is a safety switch). that is all I can remember from my swap. Hope you can get the donor home to get what ever else you need. It takes a pretty full weekend to do the swap if you have all the parts off the donor.
White 2002 Ranger XLT Extended Cab 4.0 4x4 4.10 LS
K&N CAI 77-2529KP
2 1/4" Exhaust
Explorer Dome Light
IN THE WORKS:
Sable Electric Fan
“If you do not know where you are going, every road will get you nowhere.”
Last edited by Clem; 03-05-2010 at 01:34 PM.