HI!... Well I got my rear disc set-up. This uses the COBRA 12" vented rear rotors and COBRA calipers. I still have to get the COBRA flex lines and notch the caliper brackets so they mount behind the axle flange.







HI!... I will need to modify them to look like this :



My photoshop skills suck! LOL!



HI!... I did a trial fit on my truck a few days ago and it seems my stock 15's still fit over the COBRA rear set-up. It all depends on the design of the rim. My Centerline "CONVO PRO'S" are 15" and they clear by like a 1/4". The COBRA caliper is like 1mm from touching the stock 15" rim. Nothing a grinder won't fix on the caliper. My calipers have a small raised casting on them. I figure if I take the casting off I should have about a 1/8" room to spare which is plenty. I'll know once I do the final install.

HI!... Well I finally installed my COBRA rear disc brake set-up on the weekend. Took about 3 hours. I had to slightly grind the calipers. About a 1/16 of an inch in one spot to clear my 15" factory rims. They didn't rub but they were VERY close to so I decided to give them a bit more room. Everything seems to work O.K so I'll be tearing everything back down this Sat and will be painting everything. Here's a few pics.







HI!... Well this weekend I got everything all sandblasted and painted up. Got the E-brakes hook up as well.

__________________
"2007" RANGER SPORT.
DERALE 16" ELECTRIC FAN, ASP CRANK PULLEY, CUSTOM CAI, 4.10 gears, TP tune. 1/4 = 14.42E.T at 93.18MPH 2.0 60FT. ALL N/A. 13.83E.T at 96.35MPH 1.91 60FT. on 40H.P dry shot.
"1999" F-150 SPORT.
BUILT 5.4, (8.4:1 compression) ALL N/A 354RWH.P/392RWTQ 1.8 60FT. 13.60E.T (on 7 cylinders)
"1983" PRO STREET RANGER.
408 STROKER, (700H.P) ALL N/A tubbed, caged.

JUST SAY NO TO CLUTCH FANS!

Looks good! How much did all of that run you?

__________________
Mods: Xcal 2, K&N Drop-In, Line-X, DSG Heads/Corners, 6000k Hi/Low HID's, 6K HID Fogs, Foglight Mod, Throttle Cable Mod, 6.5" Digital Designs, Rockford P400.4, 2 Sundown SA-15's, MB Quart DSC 2000.1d, Cranked T-Bars, 285/75/R16 Nitto Terra Grapplers

Where did you get the caliper brackets and what did you use to cut them?

__________________
2002 4 DR Edge 3.0 auto
275/60R17
Pro Comp Xtreme Alloy 17 X 9
Rear lift block removed
99 Explorer seats reupholstered

HI!... I got the COBRA calipers off e-bay for $198 for the pair, new. The rest of the kit was also bought off Ebay for $150. I think I got about $425(CAN) in the conversion.

__________________
"2007" RANGER SPORT.
DERALE 16" ELECTRIC FAN, ASP CRANK PULLEY, CUSTOM CAI, 4.10 gears, TP tune. 1/4 = 14.42E.T at 93.18MPH 2.0 60FT. ALL N/A. 13.83E.T at 96.35MPH 1.91 60FT. on 40H.P dry shot.
"1999" F-150 SPORT.
BUILT 5.4, (8.4:1 compression) ALL N/A 354RWH.P/392RWTQ 1.8 60FT. 13.60E.T (on 7 cylinders)
"1983" PRO STREET RANGER.
408 STROKER, (700H.P) ALL N/A tubbed, caged.

JUST SAY NO TO CLUTCH FANS!

HI!... I got the caliper brackets in the kit pictured above. I used a 4-1/2" disc grinder with a 1/16" zip blade. Cut through it like butter.

__________________
"2007" RANGER SPORT.
DERALE 16" ELECTRIC FAN, ASP CRANK PULLEY, CUSTOM CAI, 4.10 gears, TP tune. 1/4 = 14.42E.T at 93.18MPH 2.0 60FT. ALL N/A. 13.83E.T at 96.35MPH 1.91 60FT. on 40H.P dry shot.
"1999" F-150 SPORT.
BUILT 5.4, (8.4:1 compression) ALL N/A 354RWH.P/392RWTQ 1.8 60FT. 13.60E.T (on 7 cylinders)
"1983" PRO STREET RANGER.
408 STROKER, (700H.P) ALL N/A tubbed, caged.

JUST SAY NO TO CLUTCH FANS!

There's more info here for you guys regarding the COBRA rear brake swap on a RANGER....

CLICK: http://www.fordrangerforum.com/how-s...-rear-end.html

__________________
'01 XLT disguised as a '03 Fx4 Level II.