Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 11-26-2008, 11:33 PM
Posts: n/a
Default i have a 1988 ford ranger pickup it has a leak between the clutch and the...

...reservoir and the clutch i cant find i can smell the leak in the cab and it is not from the reservoir itself
Reply With Quote
Old 07-05-2009, 09:42 PM
Grrranger Grrranger is offline
Like the Forums
Join Date: Jul 2009
Posts: 33

First time I had that on an '88 Bronco II, I wound up putting a new slave cylinder in. This was caused by a cracked lid on the reservior, which allowed dirt in. Flushed out all the old fluid and put a new reservior on - which was pretty easy compared to getting the transmission out to change the slave cylinder.

From the reservior, a hose runs down to the master cylinder and from there to the quick connect fitting at the driver's side of the bell housing. Good luck!
Reply With Quote
Old 10-11-2009, 08:51 AM
DangerRanger98Josh DangerRanger98Josh is offline
Learning to use the forums
Join Date: Oct 2009
Posts: 8

follow the line from the res down to master, then to the slave. you might have a bad throw out bearing or slave cylinder.. or cracked lid like Grrranger said
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
My 1988 Ford Ranger pickup truck won't start? Gary P General Tech 8 10-20-2012 01:54 PM
1998 Ford Ranger Pickup 4-cyl stick. The problem is the clutch. As I let out the... Will Ferrel Drivetrain Tech 11 04-07-2011 11:34 AM
1988 Ford Ranger Pickup, Why won't it start? (electical Problem)? Dred General Ford Ranger Discussion 3 12-25-2008 05:01 PM