Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 01-17-2009, 09:09 AM
turbo_diesel08
Guest
 
Posts: n/a
Default 2003 ford ranger hard going into gear?

i have a 2003 ford ranger with a 2.3 liter 4 cylinder 5 speed manual transmission that has trouble going into gear, it's mostly from a dead stop that i have trouble going into gear...the clutch slave cylinder is working properly...it's not leaking any clutch fluid...it's also been bled the clutch...what could be wrong?
Reply With Quote
  #2  
Old 01-17-2009, 09:09 AM
Handyman
Guest
 
Posts: n/a
Default

You may just be low on gear oil , Find the top plug on the side of your tranny and remove it ,if it does'nt run out when you remove the plug stick your finger into the hold and see if you feel oil , if not you need to add some gear oil , like a 80- 90 w gear oil.
Reply With Quote
  #3  
Old 01-17-2009, 09:13 AM
crazyem
Guest
 
Posts: n/a
Default

mine's been ornery lately with the cold, but I'm also probably about due for a new clutch. don't know what else to tell ya.
Reply With Quote
  #4  
Old 01-17-2009, 09:15 AM
Family Man
Guest
 
Posts: n/a
Default

Synchronizers could be going bad in it
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
1988 ford ranger 2.9 extended cab 4wd gas smell out exhaust and hard start? gerardo m Exhaust and Mufflers 5 11-07-2013 08:07 PM
why does my ford ranger have a real hard jerk going into gear? christopher s Drivetrain Tech 10 08-03-2009 06:49 PM
hi or low gear scooby stew General Ford Ranger Discussion 3 06-10-2009 02:38 PM
Car/Truck Experts: 2003 Ford Ranger is having clutch/gear problems? TheOneOfLight Drivetrain Tech 1 01-01-2009 02:44 PM