Hey guys, wondering if anybody has any experience with removing the clutch pedal rod from the master cylinder from inside the truck? I got the rod off the pedal and can't for the life of me get the rod out of the master cylinder! I have the replacement part (clutch pedal switch spring) but can't install! Help!

__________________
2003 XLT 2.3 SONIC BLUE
A.R.E topper - Led 3rd brake light - Led 4th brake light (tailgate bar) - Blue Led footwell lighting - Auxilary back up lights - Aftermarket yellow fog lights - Maglight Mod - more to come!

Pull pretty hard while twisting to the left is what I did to get it to snap out.

This post may provide some additional info.

__________________
2010 Silver Ford Ranger XLT 2.3L 2WD StyleSide Reg Cab Auto, Open 7.5" - 4.10 diff.
TruxEdo tonneua cover, rubber bed mat, Ranger all weather floor mats.

I left mine attached to the pedal and pulled the pedal back to get mine to come out. Beware as this method is known to break cheap master cylinders

__________________
2003 fx4 levelII 4.0 5speed manual t-case 4.10 gears with eaton E locker in the back.

2001 mountaineer 5.0 awd loaded and stock

2004 chevy 3500 cclb dually duramax