|
06-29-2011, 05:06 PM
|
|
LOWERED!
|
|
Join Date: Jan 2011
Posts: 2,863
|
|
manual clunks while shifting
my 99 with a 2.5 5 speed, 3.73 gears, 92k miles
i notice that most of the time when i shift from 1st to 2nd, theres a clunk sounding from the tranny. my truck is lower miles (92k) and the clutch is still fine. the clunk is when move from 1st to 2nd.
any thoughts? thanks!
__________________
'99 Ranger XLT Reg. Cab Stepside
2.5L
2WD
5spd
K&N Filter
Air Box Mod
Explorer OHC
2/3 Drop
Join!! FRF no-lifers Clan
|
Register and never see these ads again. |
|
06-29-2011, 05:11 PM
|
|
Ford Ranger Driver
|
|
Join Date: Oct 2010
Posts: 981
|
|
Re: manual clunks while shifting
Mine does the same thing. Ford tells me its "typical rear end play". I don't believe them.
__________________
2007 FORD RANGER XLT EXTENDED CAB - 4.0, 4x4, 5sp
Ultragauge, 10" L7 W/ 2200W PA Amp, CB W/4' Fiberglass whip, PA system, LEER shell w/led 3rd brake and custom remover, LED taillights in mudflaps, 5K 55W HIDs, Aux reverse lights, DIY bed liner, Hellas, Bed mat (cut up livestock mat).
Quote:
Originally Posted by 2004xlmiller
yea with 4.10s a 3.slow and 33s it will be a 3.dudegetthefuckouttamywayyouresoslow
|
|
06-29-2011, 05:12 PM
|
|
ford dealer parts guy
|
|
Join Date: Apr 2011
Posts: 20,938
|
|
Re: manual clunks while shifting
id say it was the driveshaft slipe yoke but with the OPs truck being 2wd im not sure if it has one
__________________
2021 F150 5.0 Screw
Past:18 F150 2.7, 16 F150 5.0, 14 F150 5.0, 07 F150 5.4, 03 Ranger 4.0
Master Certified Ford Parts / Warranty Admin
|
06-29-2011, 05:12 PM
|
|
LOWERED!
|
|
Join Date: Jan 2011
Posts: 2,863
|
|
Re: manual clunks while shifting
ok yea hopefully is doesnt turn into a problem
__________________
'99 Ranger XLT Reg. Cab Stepside
2.5L
2WD
5spd
K&N Filter
Air Box Mod
Explorer OHC
2/3 Drop
Join!! FRF no-lifers Clan
|
06-29-2011, 05:14 PM
|
N/A
|
|
Join Date: Jan 2011
Posts: 9,031
|
|
Re: manual clunks while shifting
Quote:
Originally Posted by tmoore78
Mine does the same thing. Ford tells me its "typical rear end play". I don't believe them.
|
wow that doesnt surprise me ford said that, there sales may have increased but their
B-S service still sucks
|
|
|
|
06-29-2011, 05:17 PM
|
|
Ford Ranger Driver
|
|
Join Date: Oct 2010
Posts: 981
|
|
Re: manual clunks while shifting
Quote:
Originally Posted by djfllmn
id say it was the driveshaft slipe yoke but with the OPs truck being 2wd im not sure if it has one
|
not too sure on that one. I greased mine and it wasn't the issue though.
SalRanger2
can you feel it in the shifter , does it feel like you have to hit the exact RPM to shift?
----------
Quote:
Originally Posted by Rango88
wow that doesnt surprise me ford said that, there sales may have increased but their
B-S service still sucks
|
+1
The guy didn't even drive it.
put it on the lift and said " i don't see anything wrong with it"
I drove him around the block and he said" oh thats typical, I can get my mustang to do that all the time"
__________________
2007 FORD RANGER XLT EXTENDED CAB - 4.0, 4x4, 5sp
Ultragauge, 10" L7 W/ 2200W PA Amp, CB W/4' Fiberglass whip, PA system, LEER shell w/led 3rd brake and custom remover, LED taillights in mudflaps, 5K 55W HIDs, Aux reverse lights, DIY bed liner, Hellas, Bed mat (cut up livestock mat).
Quote:
Originally Posted by 2004xlmiller
yea with 4.10s a 3.slow and 33s it will be a 3.dudegetthefuckouttamywayyouresoslow
|
|
|
|
|
06-29-2011, 05:17 PM
|
|
LOWERED!
|
|
Join Date: Jan 2011
Posts: 2,863
|
|
Re: manual clunks while shifting
Quote:
Originally Posted by tmoore78
not too sure on that one. I greased mine and it wasn't the issue though.
SalRanger2
can you feel it in the shifter , does it feel like you have to hit the exact RPM to shift?
|
yes sort of, i notice it more when i shift into 2nd going easy under 20 mph
__________________
'99 Ranger XLT Reg. Cab Stepside
2.5L
2WD
5spd
K&N Filter
Air Box Mod
Explorer OHC
2/3 Drop
Join!! FRF no-lifers Clan
|
06-29-2011, 05:18 PM
|
|
ford dealer parts guy
|
|
Join Date: Apr 2011
Posts: 20,938
|
|
Re: manual clunks while shifting
Quote:
Originally Posted by tmoore78
not too sure on that one. I greased mine and it wasn't the issue though.
|
hmm...interesting
__________________
2021 F150 5.0 Screw
Past:18 F150 2.7, 16 F150 5.0, 14 F150 5.0, 07 F150 5.4, 03 Ranger 4.0
Master Certified Ford Parts / Warranty Admin
|
06-29-2011, 05:21 PM
|
|
Ford Ranger Driver
|
|
Join Date: Oct 2010
Posts: 981
|
|
Re: manual clunks while shifting
Quote:
Originally Posted by SalRanger2
yes sort of, i notice it more when i shift into 2nd going easy under 20 mph
|
Same here.
1-2 is the worst. I have had people tell me numerous things, the issue seems relevant to what they are saying. so I try it and get no results.
Trans mount
slip yoke
u-joints
rear end fluid
suspension loose
engine mount
last thing i haven't check because i don't know how: rear end backlash
__________________
2007 FORD RANGER XLT EXTENDED CAB - 4.0, 4x4, 5sp
Ultragauge, 10" L7 W/ 2200W PA Amp, CB W/4' Fiberglass whip, PA system, LEER shell w/led 3rd brake and custom remover, LED taillights in mudflaps, 5K 55W HIDs, Aux reverse lights, DIY bed liner, Hellas, Bed mat (cut up livestock mat).
Quote:
Originally Posted by 2004xlmiller
yea with 4.10s a 3.slow and 33s it will be a 3.dudegetthefuckouttamywayyouresoslow
|
|
06-29-2011, 05:21 PM
|
|
LOWERED!
|
|
Join Date: Jan 2011
Posts: 2,863
|
|
Re: manual clunks while shifting
Quote:
Originally Posted by djfllmn
id say it was the driveshaft slipe yoke but with the OPs truck being 2wd im not sure if it has one
|
could you explain a little on this, im not very knowledgable on the slip yoke part of it
__________________
'99 Ranger XLT Reg. Cab Stepside
2.5L
2WD
5spd
K&N Filter
Air Box Mod
Explorer OHC
2/3 Drop
Join!! FRF no-lifers Clan
|
06-29-2011, 05:23 PM
|
|
ford dealer parts guy
|
|
Join Date: Apr 2011
Posts: 20,938
|
|
Re: manual clunks while shifting
Quote:
Originally Posted by SalRanger2
could you explain a little on this, im not very knowledgable on the slip yoke part of it
|
what a slip yoke does is allows the driveshaft to become longer/shorter as the rear suspension goes through its travel
__________________
2021 F150 5.0 Screw
Past:18 F150 2.7, 16 F150 5.0, 14 F150 5.0, 07 F150 5.4, 03 Ranger 4.0
Master Certified Ford Parts / Warranty Admin
|
06-29-2011, 05:25 PM
|
|
LOWERED!
|
|
Join Date: Jan 2011
Posts: 2,863
|
|
Re: manual clunks while shifting
Quote:
Originally Posted by djfllmn
what a slip yoke does is allows the driveshaft to become longer/shorter as the rear suspension goes through its travel
|
oh like the two piece driveshaft?
__________________
'99 Ranger XLT Reg. Cab Stepside
2.5L
2WD
5spd
K&N Filter
Air Box Mod
Explorer OHC
2/3 Drop
Join!! FRF no-lifers Clan
|
06-29-2011, 05:25 PM
|
|
Ford Ranger Driver
|
|
Join Date: Oct 2010
Posts: 981
|
|
Re: manual clunks while shifting
Quote:
Originally Posted by SalRanger2
oh like the two piece driveshaft?
|
yes!
__________________
2007 FORD RANGER XLT EXTENDED CAB - 4.0, 4x4, 5sp
Ultragauge, 10" L7 W/ 2200W PA Amp, CB W/4' Fiberglass whip, PA system, LEER shell w/led 3rd brake and custom remover, LED taillights in mudflaps, 5K 55W HIDs, Aux reverse lights, DIY bed liner, Hellas, Bed mat (cut up livestock mat).
Quote:
Originally Posted by 2004xlmiller
yea with 4.10s a 3.slow and 33s it will be a 3.dudegetthefuckouttamywayyouresoslow
|
|
06-29-2011, 05:29 PM
|
|
LOWERED!
|
|
Join Date: Jan 2011
Posts: 2,863
|
|
Re: manual clunks while shifting
Quote:
Originally Posted by tmoore78
yes!
|
ok! nope mine is one piece. maybe i need u joints? theyre original. i should check them sometime regardless.
__________________
'99 Ranger XLT Reg. Cab Stepside
2.5L
2WD
5spd
K&N Filter
Air Box Mod
Explorer OHC
2/3 Drop
Join!! FRF no-lifers Clan
|
06-29-2011, 05:34 PM
|
|
Liking the Ford Ranger Forum
|
|
Join Date: Jun 2011
Posts: 21
|
|
Re: manual clunks while shifting
mine does it too but is worst going from 3 to 4
__________________
1996 Ford Ranger XLT v6 4.0L 5 Speed 2wd
no mods yet
|
Thread Tools |
Search this Thread |
|
|
|
|