 |
 |
 |
|
#1
06-23-2011, 02:09 PM
|
||||
|
||||
would this work?
i have an open diff. i want something to act like a lsd. would this work
http://www.jamesoaksenterprises.com/...88-lockers.htm Powertrax Lock-Right P/N PT 1822 Ford 8.8-Inch 31-Spline Locker For Open Differentials Fits 1987 & newer 31-spline 8.8-Inch rear axles. The Powertrax Lock-Right and Performance Lockers' straight-line performance is equal to a solid spool axle, yet automatically unlocks to allow full differentiation in turns. The lockers also reduce the excessive noise, tire wear, and drivetrain damage associated with other lockers. Made in the U.S.A., Powertrax lockers replace the spider gears in your differential carrier without affecting your ring and pinion settings. The whole job can be done in your driveway with common hand tools in a couple of hours. A carrier is not included. Price $303.95 a picture is half way down the page in the middle. also how do i kno if i have the 28 or 31 spline axles
__________________
Colin S. AGE: 18 1994 Ford Ranger XLT 4x4 reg. cab 4.0l 5spd, 2" SL , Summit Nomads 15x8, 30x9.5x15 Trail Digger M/T's, cab lights, spray in bed liner, custom tube bumper, 1994 Ford Ranger XLT 2.3l 5spd ext. cab. the loaner truck 1987 Camaro z28 383 to much to list https://www.facebook.com/colinshriver http://www.fordrangerforum.com/proje...anger-4x4.html 
|
 |
 |
| Register and never see these ads again. | |
|
|
|
|
|
#2
06-23-2011, 02:11 PM
|
||||
|
||||
|
Re: would this work?
its aloooot of work to add a locker man. You need to know if you have an 8.8 housing and how many splines are on your axle. its almost always going to be 28 spline.
__________________
YZ the way to be! The Brotherhood! Mods to come: Camburg entry 6.0 system. FiberwerkX Fenders and bedsides. Tube bumper. R.I.P. Jeff Ashton. 1992-2011
|
|
|
|
|
|
#3
06-23-2011, 02:13 PM
|
||||
|
||||
|
Re: would this work?
yea, and you could just have a 7.5..
__________________
http://treadlightly.org/quick-tips-f...four-wheeling/
|
|
|
|
|
|
#4
06-23-2011, 02:13 PM
|
||||
|
||||
|
Re: would this work?
i have the 8.8 i ran the axle code. i just dont kno what spline i have.
also this isnt the whole thing it just replsaces the spider gears
__________________
Colin S. AGE: 18 1994 Ford Ranger XLT 4x4 reg. cab 4.0l 5spd, 2" SL , Summit Nomads 15x8, 30x9.5x15 Trail Digger M/T's, cab lights, spray in bed liner, custom tube bumper, 1994 Ford Ranger XLT 2.3l 5spd ext. cab. the loaner truck 1987 Camaro z28 383 to much to list https://www.facebook.com/colinshriver http://www.fordrangerforum.com/proje...anger-4x4.html
|
|
|
|
|
|
#5
06-23-2011, 02:16 PM
|
||||
|
||||
|
Re: would this work?
the only safe way is to pull your azle and count them. and yes a locker replaces the spider gears and just bolts up
__________________
YZ the way to be! The Brotherhood! Mods to come: Camburg entry 6.0 system. FiberwerkX Fenders and bedsides. Tube bumper. R.I.P. Jeff Ashton. 1992-2011
|
|
|
|
|
|
#6
06-23-2011, 02:20 PM
|
||||
|
||||
|
Re: would this work?
is there a way to seee by just pulling the cover off? and not pulling the axle
__________________
Colin S. AGE: 18 1994 Ford Ranger XLT 4x4 reg. cab 4.0l 5spd, 2" SL , Summit Nomads 15x8, 30x9.5x15 Trail Digger M/T's, cab lights, spray in bed liner, custom tube bumper, 1994 Ford Ranger XLT 2.3l 5spd ext. cab. the loaner truck 1987 Camaro z28 383 to much to list https://www.facebook.com/colinshriver http://www.fordrangerforum.com/proje...anger-4x4.html
|
|
|
|
|
|
#7
06-23-2011, 02:21 PM
|
||||
|
||||
|
Re: would this work?
it can be done its just REALLLY hard.
---------- or you can call ford and ask them
__________________
YZ the way to be! The Brotherhood! Mods to come: Camburg entry 6.0 system. FiberwerkX Fenders and bedsides. Tube bumper. R.I.P. Jeff Ashton. 1992-2011
|
|
|
|
|
|
#8
06-23-2011, 02:26 PM
|
||||
|
||||
|
Re: would this work?
so i could go to my dealership and ask i take it i need to give them my vin then?
__________________
Colin S. AGE: 18 1994 Ford Ranger XLT 4x4 reg. cab 4.0l 5spd, 2" SL , Summit Nomads 15x8, 30x9.5x15 Trail Digger M/T's, cab lights, spray in bed liner, custom tube bumper, 1994 Ford Ranger XLT 2.3l 5spd ext. cab. the loaner truck 1987 Camaro z28 383 to much to list https://www.facebook.com/colinshriver http://www.fordrangerforum.com/proje...anger-4x4.html
|
|
|
|
|
|
#9
06-23-2011, 02:30 PM
|
||||
|
||||
|
Re: would this work?
yes the vin
__________________
YZ the way to be! The Brotherhood! Mods to come: Camburg entry 6.0 system. FiberwerkX Fenders and bedsides. Tube bumper. R.I.P. Jeff Ashton. 1992-2011
|
|
|
|
|
|
#10
06-23-2011, 02:33 PM
|
||||
|
||||
|
Re: would this work?
thanks lol i will do that tommorrow my dealership loves me!
__________________
Colin S. AGE: 18 1994 Ford Ranger XLT 4x4 reg. cab 4.0l 5spd, 2" SL , Summit Nomads 15x8, 30x9.5x15 Trail Digger M/T's, cab lights, spray in bed liner, custom tube bumper, 1994 Ford Ranger XLT 2.3l 5spd ext. cab. the loaner truck 1987 Camaro z28 383 to much to list https://www.facebook.com/colinshriver http://www.fordrangerforum.com/proje...anger-4x4.html
|
|
|
|
|
|
#11
06-23-2011, 02:34 PM
|
||||
|
||||
|
Re: would this work?
cooolio!
__________________
YZ the way to be! The Brotherhood! Mods to come: Camburg entry 6.0 system. FiberwerkX Fenders and bedsides. Tube bumper. R.I.P. Jeff Ashton. 1992-2011
|
|
|
|
|
|
#12
06-23-2011, 02:39 PM
|
||||
|
||||
|
Re: would this work?
4.0 all have 8.8
__________________
2000 ranger 4.0v6 4x4 ext. Cab with a cap Mods.... http://www.fordrangerforum.com/proje...start-now.html
|
|
|
|
|
|
#13
06-23-2011, 02:40 PM
|
||||
|
||||
|
Re: would this work?
do you kno the axle slpine?
__________________
Colin S. AGE: 18 1994 Ford Ranger XLT 4x4 reg. cab 4.0l 5spd, 2" SL , Summit Nomads 15x8, 30x9.5x15 Trail Digger M/T's, cab lights, spray in bed liner, custom tube bumper, 1994 Ford Ranger XLT 2.3l 5spd ext. cab. the loaner truck 1987 Camaro z28 383 to much to list https://www.facebook.com/colinshriver http://www.fordrangerforum.com/proje...anger-4x4.html
|
|
|
|
|
|
#14
06-23-2011, 02:41 PM
|
||||
|
||||
|
Re: would this work?
Quote:
better way is to search for the axle tube sizes and measure yours.
__________________
Why does everyone think prerunners just jump stuff? Please click HERE to watch this video!
|
|
|
|
|
|
#15
06-23-2011, 02:46 PM
|
||||
|
||||
|
Re: would this work?
Theres a thred on hea with axel codes hold on
---------- http://www.fordrangerforum.com/drive...xle-codes.html ---------- There ya go this will telk you
__________________
2000 ranger 4.0v6 4x4 ext. Cab with a cap Mods.... http://www.fordrangerforum.com/proje...start-now.html
|
|
|
 |
«
Previous Thread
|
Next Thread
»
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Where do you work? | doyouquaxu | Off Topic | 39 | 06-16-2011 02:12 PM |
| What we do at work | Ranger01 | Laugh Factory | 11 | 09-02-2010 03:06 PM |
| Some of my work from work | dixie_boysles | Off Topic | 6 | 04-09-2010 06:26 PM |
| Will this work? | Aliker | Lifted Suspension | 4 | 04-01-2010 09:13 AM |
| will it work? | rangerfab11 | Drivetrain Tech | 3 | 11-11-2009 08:38 AM |
|
|
 |
|
|
 |
 |
 |
