Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 05-09-2011, 07:54 AM
RustRocket RustRocket is offline
Learning to use the forums
Join Date: May 2011
Posts: 2
Default 2.3L Swap and AC?

Hello all,

I have 92 Ranger with around 250K (possibly 350K... can't tell with the 5-digit odo!), and the tranny is finally starting to go (getting very whiny).

I've been thinking about getting it rebuilt or a new one. But then I got to thinking that I might want to take the opportunity to upgrade (if possible) to a 6-cylinder. As I understand it, I'd need a different tranny anyway with a 6-cylinder, right?

Also, it doesn't have AC. If I were to do all this, I'd like to go all-out and get AC in the truck as well (again, if possible). From what I understand, I'd need a different radiator to do that.

So I was hoping you folks could tell me if all this would be possible...? I'm not very much of a gearhead yet, so any info you could give me would be appreciated.

Thanks in advance!
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
7.5 to 8.8 swap. ktm200stu770 Drivetrain Tech 11 11-21-2011 06:33 AM
v8 swap DEBO Exhaust and Mufflers 7 05-07-2011 02:04 AM
V8 swap Chris993 8-Cylinder Tech 4 12-03-2010 05:26 AM
Looking to swap v-6 to v-8 CSMonte 8-Cylinder Tech 3 07-09-2010 01:07 PM
doing a 4.0 swap DEBO 4.0 SOHC / 4.0 OHV Tech 0 02-17-2010 07:37 PM