 |
 |
 |
|
#1
04-22-2011, 07:02 PM
|
||||
|
||||
need transfer case pic
Looking for some pics of how your tcase is mounted to the truck...
Mine is flopping in the wind and I cant even see how it was held before....
__________________
2006 Ranger FX4 Level 2 33x12.5 Hankook Dynamic M/T, Ion Aluminum Alloy 15x10 -4inch offset,Front winch bumper, superwinch ep9.0, 3" B/L, Torsion Crank, Chrome Bed Bar, 2 x 100 watt offroads, 6000k HID Heads/Fog(s), Pioneer H.U., 12" Jackhammer, Alpine mrp 500,train horn, whelen pa/siren Mods Headlight, Fog, Airbox, Blue led interior(not gauge cluster yet), blue led l/p, blue led side markers, color match skid plates To come sliders, suspension lift, rear bumper, tire carrier, tailgate 
|
 |
 |
| Register and never see these ads again. | |
|
|
|
|
|
#2
04-22-2011, 07:04 PM
|
||||
|
||||
|
Re: need transfer case pic
its held on by the transmission. what do you mean by "its flopping in the wind"? is your trans x-member shot?
__________________
2001 Ranger 4x4 Stepside
-RCD Suspension lift -33x12.5 BFG KM2's on Mickey Thomson classic locks -4:56 gears -Auburn gear LS -James Duff traction bars -Headers -Flowmaster duals -SCT X-Cal2 and some small exterior mods http://www.cardomain.com/ride/2321189 2005 F-150 Lariat 4x4 -LED third brake light -Weathertech floor liners -Edge tuner Last edited by 01_ranger_4x4; 04-22-2011 at 07:06 PM.
|
|
|
|
|
|
#3
04-22-2011, 07:09 PM
|
||||
|
||||
|
Re: need transfer case pic
There is a piece between transmission and trans case that looks like more transmission.
Its sheared in half but just the casing...
__________________
2006 Ranger FX4 Level 2 33x12.5 Hankook Dynamic M/T, Ion Aluminum Alloy 15x10 -4inch offset,Front winch bumper, superwinch ep9.0, 3" B/L, Torsion Crank, Chrome Bed Bar, 2 x 100 watt offroads, 6000k HID Heads/Fog(s), Pioneer H.U., 12" Jackhammer, Alpine mrp 500,train horn, whelen pa/siren Mods Headlight, Fog, Airbox, Blue led interior(not gauge cluster yet), blue led l/p, blue led side markers, color match skid plates To come sliders, suspension lift, rear bumper, tire carrier, tailgate
|
|
|
|
|
|
#4
04-22-2011, 07:11 PM
|
||||
|
||||
|
Re: need transfer case pic
thats part of your transmission, it adapts the trans to the T-Case. if thats broken that sounds like youve figured out your issue.
__________________
2001 Ranger 4x4 Stepside
-RCD Suspension lift -33x12.5 BFG KM2's on Mickey Thomson classic locks -4:56 gears -Auburn gear LS -James Duff traction bars -Headers -Flowmaster duals -SCT X-Cal2 and some small exterior mods http://www.cardomain.com/ride/2321189 2005 F-150 Lariat 4x4 -LED third brake light -Weathertech floor liners -Edge tuner
|
|
|
|
|
|
#5
04-22-2011, 07:12 PM
|
||||
|
||||
|
Re: need transfer case pic
And that part can be replaced? Cant seem to figure out what the heck its called...
__________________
2006 Ranger FX4 Level 2 33x12.5 Hankook Dynamic M/T, Ion Aluminum Alloy 15x10 -4inch offset,Front winch bumper, superwinch ep9.0, 3" B/L, Torsion Crank, Chrome Bed Bar, 2 x 100 watt offroads, 6000k HID Heads/Fog(s), Pioneer H.U., 12" Jackhammer, Alpine mrp 500,train horn, whelen pa/siren Mods Headlight, Fog, Airbox, Blue led interior(not gauge cluster yet), blue led l/p, blue led side markers, color match skid plates To come sliders, suspension lift, rear bumper, tire carrier, tailgate
|
|
|
|
|
|
#6
04-22-2011, 07:23 PM
|
||||
|
||||
|
Re: need transfer case pic
yes you can replace it. Its just a spacer really, I dont think there are any major mechanicall/functional parts to it. When I swapped my auto to manual the t-case just bolted up to it. I think the main purpose is that the drive shafts need to be the same for various trucks (auto,manual) and since the trannies are different size, ford would have to make special driveshafts for each app. This way, they put the T-case in one spot, make a universal driveshaft and just use a spacer between manual and auto trannies. Make sense...? I think I lost myself thru that
__________________
1999 | Ext. Cab | 4.0 | 4x4 | 4.10's Quote:
Replace Door pin/bushing Repair broken dome light tabs VIDEO OHC Install
|
|
|
|
|
|
#7
04-22-2011, 07:39 PM
|
||||
|
||||
|
Re: need transfer case pic
Shweet!
Ya it looks like just the casing. thanks so much again everyone!
__________________
2006 Ranger FX4 Level 2 33x12.5 Hankook Dynamic M/T, Ion Aluminum Alloy 15x10 -4inch offset,Front winch bumper, superwinch ep9.0, 3" B/L, Torsion Crank, Chrome Bed Bar, 2 x 100 watt offroads, 6000k HID Heads/Fog(s), Pioneer H.U., 12" Jackhammer, Alpine mrp 500,train horn, whelen pa/siren Mods Headlight, Fog, Airbox, Blue led interior(not gauge cluster yet), blue led l/p, blue led side markers, color match skid plates To come sliders, suspension lift, rear bumper, tire carrier, tailgate
|
|
|
 |
«
Previous Thread
|
Next Thread
»
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| transfer case | mikeydzz | General Ford Ranger Discussion | 1 | 02-09-2011 04:40 PM |
| Transfer case Help! | zatticus | Drivetrain Tech | 4 | 02-05-2011 01:24 PM |
| transfer case | dryin | Drivetrain Tech | 0 | 01-10-2011 11:33 AM |
| Transfer case Whine | SpitfireEMT | Drivetrain Tech | 3 | 03-21-2010 10:15 PM |
| Transfer Case ?s | 889402xlt | Drivetrain Tech | 2 | 02-07-2010 07:29 PM |
|
|
 |
|
|
 |
 |
 |
