Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 04-04-2011, 07:42 AM
Ranger01 Ranger01 is offline
Ford Ranger Driver
 
Join Date: Nov 2009
Posts: 2,402
Default Need help with gears!!!!!

Well i am regearing my truck and got the new ones from work. Well i got the reverse for the front and they dont fit? Are they standard?!?!?
__________________
2001 3.0 V6 Automatic "Police Interceptor"
4x4 Off-Road
3" Body Lift
Belltech 6400 Shackles
JBA Headers
LOKRITE Locker
COBRA disc conversion
Reply With Quote
  #2  
Old 04-04-2011, 08:52 AM
pooleo pooleo is offline
Ban Survivor. (x2)
 
Join Date: Jun 2010
Posts: 6,764
Default Re: Need help with gears!!!!!

reverse cut I assume...? I think the dana 28 was reverse cut.
__________________
1999 | Ext. Cab | 4.0 | 4x4 | 4.10's
Quote:
A Gladiator does not fear death. He embraces it. Caresses it. Fucks it. Each time he enters the arena, he slips his c0ck in the mouth of the beast, and prays to thrust home before the jaws snap shut. - Oenomaus
Ball Joints/Upper A-Arms How To
Replace Door pin/bushing
Repair broken dome light tabs
VIDEO OHC Install
Reply With Quote
  #3  
Old 10-14-2011, 01:17 PM
jamesagardner92 jamesagardner92 is offline
Learning to use the forums
 
Join Date: Oct 2011
Posts: 3
Default Re: Need help with gears!!!!!

Hey I'm new around here and. Have a ttb truck so I'm not positive about this but I don't believe that that ifs dana 28 and 35s were reverse cut. Only the ttb, correct me if I am misinformed though
__________________
92 Xploder 4x4 with 30x9.5s on MB racing 15x8s, full alpine sound system with two ten inch subs, billet grille. 4.0 ohv with ported heads and intake and flat top pistons, 0.020 over
Reply With Quote
  #4  
Old 10-14-2011, 01:34 PM
naturecakezzz naturecakezzz is offline
black mamba!!!!
 
Join Date: Aug 2010
Posts: 1,213
Default Re: Need help with gears!!!!!

Nah dude the d35 is, standard.. You have a d35

1998 the Ford Ranger went to a Dana 35 IFS front axle. The Dana 35 IFS switched from a reverse rotation gear to standard rotation gear. The gears in a 1997 and older Ranger/Explorer will not work in the 1998 and newer Rangers.

----------

Wow this post is 6 months old lol n/m
__________________
2000 ranger 4.0v6 4x4 ext. Cab with a cap
Mods....
http://www.fordrangerforum.com/proje...start-now.html
Reply With Quote
  #5  
Old 10-14-2011, 01:34 PM
brinker88 brinker88 is offline
TTB man
 
Join Date: Aug 2010
Posts: 1,920
Default Re: Need help with gears!!!!!

Naturecakes beat me to it! Reverse cut for the "lamens" out there means High pinion, and standard rotation means Low pinion High being the pinion is on the top of the axle, low meaning the pinion is on the bottom.
__________________
1993 Ford Ranger Ext. Cab | stepside | 4x4 | 4.0L | Lifted | 35" BFG KM2s | MT Classic IIs | Dana 35/Disc 8.8 with 4.56's | Duals | Etc

RIP JASON
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Want to Buy: 4.10 or 4.56 Gears (OH/IN) 08Ranger Sport 4x4 Engine & Drivetrain Parts 16 01-13-2011 02:52 PM
Craigslist / eBay Find: 4:10 gears Ranger009 Engine & Drivetrain Parts 2 12-22-2010 11:23 PM
gears? gdog1678 Wheels and Tires 15 11-23-2010 06:25 PM
looking for gears. mb128 Drivetrain Tech 2 04-11-2010 06:52 PM
Want to Buy: 4.10 gears 02rang Engine & Drivetrain Parts 1 03-03-2010 06:55 AM