Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 10-01-2009, 05:05 AM
yardboy2 yardboy2 is offline
Learning to use the forums
 
Join Date: Oct 2009
Posts: 7
Default Transfer case linkage

I lost the ability to shift in and out of 4 wheel drive, my mechanic says the linkage to the transfer case is shot (especially the bushings). I'm 90% sure I have the Borg Warner 1354 (mechanical). Apparently Ford doesn't make the linkage parts anymore, and local junk yards don't have anything, but there must be someone out there that has something that would work. I've contacted a few places I found on the Web with no luck. Anyone have any ideas?
__________________
Yardboy2 - 94 Ranger Super Cab, 4.0, 4X4, Manual Transmission, Manual Case
Reply With Quote
  #2  
Old 10-01-2009, 08:08 PM
RazorsEdge RazorsEdge is offline
Hardly Driven
 
Join Date: Sep 2009
Posts: 97
Default

How about it!

http://cgi.ebay.com/ebaymotors/NOS-F...Q5fAccessories
__________________
2003 Ranger Edge Regular Cab 4x4 3.0L

2005 F-250 Super Duty King Ranch 4x4 6.0L

2003 F-150 Regular Cab Sport 4x2 4.2L

1988 F-350 Regular Cab 4x4 5.8L
Reply With Quote
  #3  
Old 10-01-2009, 08:11 PM
RazorsEdge RazorsEdge is offline
Hardly Driven
 
Join Date: Sep 2009
Posts: 97
Default

I would check to make sure the linkage didnt come out of adjustment though. there are only two bolts that hold the linkage to the tranny housing. Its very simple to adjust, and believe me if its outta whack it will make it impossible to move that lever.
__________________
2003 Ranger Edge Regular Cab 4x4 3.0L

2005 F-250 Super Duty King Ranch 4x4 6.0L

2003 F-150 Regular Cab Sport 4x2 4.2L

1988 F-350 Regular Cab 4x4 5.8L
Reply With Quote
  #4  
Old 10-02-2009, 03:28 AM
rwenzing rwenzing is offline
Some assembly required...
 
Join Date: Jun 2009
Posts: 890
Default

Quote:
Originally Posted by RazorsEdge View Post
Great find. I've purchased several items from this seller and always had good luck. Shoot him a fair offer and you'll probably get it.
__________________
2003 FX4 Level II, Supercharged 5.0L V8, Headers, Duals
BW4406 manual transfer case, Aussie Locker, Torsen L/S, 4.10's
Bilstein 7100 rezzies, Cadillac/Mustang rear discs, Duff traction bars
Keypad Entry, Lock LEDs, ABS switch, sway bar discos
Heated seats, Explorer EATC, Trip Computer and consoles

2003 XLT 2.3L M5OD-R1 reg cab, 2011 Taurus SEL, 2016 C-MAX Energi Plug-in Hybrid
Reply With Quote
  #5  
Old 10-02-2009, 05:28 AM
yardboy2 yardboy2 is offline
Learning to use the forums
 
Join Date: Oct 2009
Posts: 7
Default

Quote:
Originally Posted by RazorsEdge View Post
Thanks! I appreciate the help - I'll check it out.
__________________
Yardboy2 - 94 Ranger Super Cab, 4.0, 4X4, Manual Transmission, Manual Case
Reply With Quote
  #6  
Old 10-02-2009, 05:35 AM
Fx4wannabe01 Fx4wannabe01 is offline
Ford Ranger Driver
 
Join Date: Sep 2009
Posts: 4,058
Default

I can see the bushings being shot(being that they are weak plastic and break easily), but I don't see the entire linkage being 'shot'.

I got all new bushings from the Ford dealer when I put my manual tcase in the truck.
__________________
'01 XLT disguised as a '03 Fx4 Level II.
Reply With Quote
Reply

Tags
linkage, transfer case

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
97 Ranger Automatic trans linkage... Help needed Drivetrain Tech 6 09-25-2010 06:59 PM
any advice on swapping transfer case shift motors Kayledao Drivetrain Tech 4 09-28-2009 03:19 PM
Will a 94 ford ranger Transfer case work? Jon F Drivetrain Tech 2 12-10-2008 03:44 PM