Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 03-13-2011, 03:30 PM
2010redfire 2010redfire is offline
Ford Motor Co
Join Date: Sep 2010
Posts: 168
Default carrier bearing bolt question

I am about 5 minutes away from having my project 91 ranger to the point where I can move it in and out of the garage under its own power but I have a problem. I can't find the bolts and nuts for the carrier bearing to crossmember. The guy I bought it from had taken all the stuff apart to change transmissions. I used my dead blow hammer to fix the tranny problem and now I am putting it all back together, but alas, I am missing the carrier bearing hardware. I NEED HELP...PLEASE!!! What size and grade bolts should I use?
2010 Ranger Sport 4x4 Redfire Red, stock 4.0, 3.73 gears, Putco bed rails, Line-X, Truxedo bed cover

Last edited by 2010redfire; 03-13-2011 at 03:33 PM.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Luck just turned for the worst...bolt of water pump bolt dixie_boysles 4.0 SOHC / 4.0 OHV Tech 7 07-13-2010 09:10 AM
New Driveshaft ZWilson07 Drivetrain Tech 2 05-05-2010 04:10 PM
Driveshaft ZWilson07 Drivetrain Tech 0 05-02-2010 01:59 AM
driveshaft robsranger Drivetrain Tech 12 01-14-2010 10:29 PM
driveshaft harleyizy Drivetrain Tech 0 07-19-2009 08:30 AM