Bad Slave? Different symptoms than usual
Ok so Im just going to throw this out there incase someone has had this particular symptom...
So My 2004 with a 5 spd has been shifting hard like the slave cylinder is going except it started something odd, sometimes when you let the clutch pedal out for a split second the clutch doesnt reingage, resulting in a shift where its like i Just dropped the clutch, its been doing this randomly for over a year, and hasnt been consistant in any way...
So this morning start the truck up and the clutch feals odd, when depressed it wont go all the way down untill becoming firmer and having to apply lots of pressure. it willl not go into gear with truck running So i shut truck off, put in gear, start up, and you can feal it engaged slightly with pedal depressed, if you let clutch pedal out the clutch doesnt fully engage and slips, you can drive it and shift it once moving but the clutch slips really bad...
So would a bad slave cause the Clutch to not fully engage or could something be wrong with the clutch itself?
Ive already bled the clutch fluid untill clean and it isnt leaking any fluid that i can notice any where, peeking through the inspection plug its dry and appears in order.
Thanks for any ideas
2004 Ranger extra cab, 4.0, 5 spd, 4x4
mods, 2.5 inch dynomax exhaust, otherwise bonestock... for now
Last edited by Crazyham; 02-20-2011 at 01:48 PM.