the end of my Dana 30 swap is coming up (should be done this weekend) however decided instead 4.10s front and rear i am going to chunk in 4.88s any comments on 4.88s and 33"s lol its going to be torquey big upgrade from the current death at 75MPH and no 4hi torque

__________________
'05 Ranger Edge SAS'd, 5.38's, D60/D60U, 38.5" TSL SX's, October 2012 TOTM, build thead

are you planning on just staying on 33s or going bigger later?

__________________
99 extended cab, 4.0, auto, 33s, 4x4 lifted with some stuff done

98 2wd 2.5, 5 speed, dropped with some stuff done

35" on 16x10s but not until the 33"s are bald

__________________
'05 Ranger Edge SAS'd, 5.38's, D60/D60U, 38.5" TSL SX's, October 2012 TOTM, build thead

thats gonna be rough on the 30... but when you have 35s the gearing will work fine, rstangboi is on 35s with 4.88s, i would ask him if he ever had 33s on it before he threw on the 35s... but you will be able to drive it, it might be over geared. let us know!

oh on a side not i know lots of toyota guys run 5.29s with 33-35 inch tires... so it might work for you.

__________________
99 extended cab, 4.0, auto, 33s, 4x4 lifted with some stuff done

98 2wd 2.5, 5 speed, dropped with some stuff done

toyos don't make the same power nissans run 5.13s stock.

not hugely worried about over gearing i mean it spins tires now and i would be very happy if it spun them in 4hi just saying

__________________
'05 Ranger Edge SAS'd, 5.38's, D60/D60U, 38.5" TSL SX's, October 2012 TOTM, build thead