Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #16  
Old 01-20-2011, 03:04 PM
terryduanemiller terryduanemiller is offline
www.shanewootenband.com
 
Join Date: Oct 2010
Posts: 1,896
Default Re: Please help with clutch and throw out bearing replacment

Quote:
Originally Posted by justinboyce View Post


http://www.pepboys.com/catalog/partr...ory=4&group=46

Here is the clutch that I found for $209. I called Pepboys and the guy said that it included the slave and throw out bearing. It also has a technical document on the website that has some instructions for the slave so I am hoping that means it is included...but even if I have to buy the slave seperatly..I think this is still a better deal then anywhere else.
that is t/o bearing only, no slave..

----------

Quote:
Originally Posted by justinboyce View Post

Here is the clutch that I found for $209. I called Pepboys and the guy said that it included the slave and throw out bearing. It also has a technical document on the website that has some instructions for the slave so I am hoping that means it is included...but even if I have to buy the slave seperatly..I think this is still a better deal then anywhere else.
bet the guy that answered that question doesn't even own a set of wrenches.. no slave in that pic
__________________
MY BUILD THREAD
1999 MAZDA 2500SE, 2.5L 4-clanger, 5 speed, Green n slow. Rangers as daily drivers since 1988.
ASE Certified Mechanic, Builder of Show Destroying Protouring and Classic cars..
Reply With Quote
  #17  
Old 01-20-2011, 04:09 PM
03fx4 03fx4 is offline
Ford Tough
 
Join Date: Oct 2010
Posts: 483
Default Re: Please help with clutch and throw out bearing replacment

An 18mm open end wrench works good on the slave quick connect. Also when removing the front drive shaft don't just rip it out and pull the cv joint apart.
__________________
2003 fx4 levelII 4.0 5speed manual t-case 4.10 gears with eaton E locker in the back.

2001 mountaineer 5.0 awd loaded and stock

2004 chevy 3500 cclb dually duramax
Reply With Quote
  #18  
Old 01-20-2011, 04:16 PM
Johnbaum13 Johnbaum13 is offline
<-----Buzz Killington
 
Join Date: Jul 2009
Posts: 1,232
Send a message via Yahoo to Johnbaum13
Default Re: Please help with clutch and throw out bearing replacment

As far as bleeding the slave, I've always used the gravity bleed method when by myself, never had an issue that way.
__________________
I got my Jesus on the dashboard, but the Devil's under my hood!
Reply With Quote
  #19  
Old 01-20-2011, 04:59 PM
modelageek modelageek is offline
Ford Ranger Driver
 
Join Date: Jan 2009
Posts: 6,257
Default Re: Please help with clutch and throw out bearing replacment

Quote:
Originally Posted by Johnbaum13 View Post
As far as bleeding the slave, I've always used the gravity bleed method when by myself, never had an issue that way.
me too
__________________
2004 Ext Cab, 4WD, 4.0, Auto, 154k. (4.0 engine is out of a 2009 Ranger w/96k) ( as of 7/1/2017)

2004 Ranger, Ext Cab, 2WD, 3.0, 5 speed , 4WABS, crank windows, no cruise, Edge 116k.(6/5,2014) (SOLD).
1999 Ford Ranger, Reg Cab, 2.5, 5 speed, 2WD, no AC, 150k (SOLD).
Reply With Quote
  #20  
Old 04-04-2011, 07:58 PM
Yacomash800 Yacomash800 is offline
Learning to use the forums
 
Join Date: Mar 2011
Posts: 12
Default Re: Please help with clutch and throw out bearing replacment

is it possible for the slave cylinder to go bad without leaking? ive bleed the lines like 3 time and the thing bareky moves. ive tried my vaccum pump and gravity and the way that requires two people. ive gone through a half a quart and nothing seems to work. there is no fluid leaking out the slave. so whats the problem here?
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bad throw out bearing? ObsoleteE 4-Cylinder Tech 20 11-15-2011 01:39 PM
5.0 t5 clutch throw RichardBoat 8-Cylinder Tech 2 01-16-2011 07:05 AM
fan clutch replacment 2003fordranger 4.0 SOHC / 4.0 OHV Tech 5 10-25-2010 04:08 PM
Throw-out bearing removal - 1998 5 speed vanharleyman Drivetrain Tech 4 10-29-2009 06:40 PM
What should I expect to pay to have a throw out bearing replaced in a... flattrack75081 Drivetrain Tech 1 01-15-2009 09:16 PM