Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 12-05-2010, 08:23 PM
WildlandFirefighter WildlandFirefighter is offline
Blut und Ehre
Join Date: Dec 2010
Posts: 394
Default 4x4 won't work

I have just gotten a 1985 Ford Ranger 4x4. The transfer case will engage to 4wd but the hubs are manual. I tried turning them like you suppose to and thinking the wheel was engage but it wasn't...thus leaving me stuck.

I later checked to see what the problem was... I put the transfer case in N and turned the front driveshaft....both axle shafts were moving. So I am thinking the hub locks are gone.

I went to the parts store and they only sell the whole hub assembly with the lock in it itself. LIKE WTF?

Can't I just buy regular hub locks or what like on a regular truck instead of the whole hub assembly?
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
4x4 wont work rangedanger98 Drivetrain Tech 0 08-11-2010 02:49 PM
Will this work? Aliker Lifted Suspension 4 04-01-2010 09:13 AM
Which F-series coils work best 1988 rnger 4x4 mykdee Lifted Suspension 11 02-28-2010 07:29 AM
92 xlt 4.0L manny 4x4 wont go into 4x4 mnmtl Drivetrain Tech 0 01-06-2010 12:00 PM
will it work? rangerfab11 Drivetrain Tech 3 11-11-2009 08:38 AM