Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 12-04-2010, 11:34 PM
tmkfpatryk tmkfpatryk is offline
Learning to use the forums
Join Date: Nov 2010
Posts: 4
Default clutch pedal push rod spring

So I need to get the whole master cylinder and hydraulic line to bench bleed it (as I am going to be putting on a new slave and i am like pretty dry out of fluid as it all leaked out on the road)

the haynes manual says to remove clip or spring from push rod located on top of the clutch pedal.

truck is an 03 ford ranger

There is a black looking clip thing connected on top of the pushrod to the pedal, is that it? and how do i take it off, tried using screwdriver and needle nose pliers with no go
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
just replaced clutch now im hearing a rod knock patrick69 4-Cylinder Tech 4 11-10-2010 07:33 AM
Clutch pedal bushing??!! Help Erock Drivetrain Tech 4 06-25-2010 12:25 PM
Clutch pedal problems DangerRangerNJ Drivetrain Tech 2 05-27-2010 07:47 PM
need help with 2002 clutch pedal timsmith 4-Cylinder Tech 1 05-04-2010 10:33 PM
mustang clutch pedal bhs608 Drivetrain Tech 0 03-09-2010 03:31 PM