Hi, no detailed here but. I will suggest you search here and see others results. Clutch is not that big of a deal supposing you get all of the housing bolts out. Everything is pretty self explanitory as far as what to disconnect to remove the bell housing. Once it is removed then you'll need basic tools including a tq ratchet, and two biggies are make sure you have a N95 respirator and be prepared to have to replace or refinish the flywheel, which will call for new flywheel bolts. The dust from the flywheel can be extremely bad for your health. If you are mechanically inclined then it should not be too big of a deal for you to do, maybe invite a mechanic buddy over for s few beers.
|