Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 08-25-2009, 12:17 PM
rmalinger rmalinger is offline
Learning to use the forums
 
Join Date: Aug 2009
Posts: 2
Default 94 Ford Ranger (Replace clutch plate)

Dear Forum:

I am seeking some advice on replacing a pressure clutch plate on a 3.0 6 cylinder 4x2 manual 1994 Ford Ranger.
When I am driving down the road at constant speed every once in a while it sounds like the engine revving up with no increase in speed. I have been told that it sounds like the clutch plate is slipping.
I do not have the money to take it to the shop and would like to know if anyone knows of a web site or anything that would give me detailed instructions on how to change it.

Does anyone out there know of any good how to websites?

Rick

Last edited by rmalinger; 08-27-2009 at 05:00 AM. Reason: Additional information
Reply With Quote
  #2  
Old 08-26-2009, 07:15 AM
02'4.04x4 02'4.04x4 is offline
Ford Ranger Driver
 
Join Date: Aug 2009
Posts: 634
Default

Hi, no detailed here but. I will suggest you search here and see others results. Clutch is not that big of a deal supposing you get all of the housing bolts out. Everything is pretty self explanitory as far as what to disconnect to remove the bell housing. Once it is removed then you'll need basic tools including a tq ratchet, and two biggies are make sure you have a N95 respirator and be prepared to have to replace or refinish the flywheel, which will call for new flywheel bolts. The dust from the flywheel can be extremely bad for your health. If you are mechanically inclined then it should not be too big of a deal for you to do, maybe invite a mechanic buddy over for s few beers.
Reply With Quote
  #3  
Old 08-27-2009, 05:01 AM
rmalinger rmalinger is offline
Learning to use the forums
 
Join Date: Aug 2009
Posts: 2
Default Reply

I was wondering if you knew of any good free how to websites
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to replace the heater core in an 02 ford ranger? Melissa Interior Tech 8 03-19-2013 07:55 PM
Need to replace Bumper on a Ford Ranger kttrophy Introduce Yourself 2 06-25-2009 08:10 AM
Skid plate tylerm3 General Ford Ranger Discussion 4 06-22-2009 04:10 PM
if you have a 2000 ford ranger and the airbag has deployed do you have to replace... jimmydean.6969 General Ford Ranger Discussion 1 12-22-2008 05:44 PM
How much will it cost to replace windshield in 1993 Ford ranger? koolkat Exterior Tech 1 12-17-2008 02:45 AM