OK, so I was under the truck chopping my exhaust off and to my surprise I have a leak... I believe it is in the transfer case.
I will get pic and post but if it is transfer case what are my options?
Really know nothing about this part of my truck...

__________________
2006 Ranger FX4 Level 2
33x12.5 Hankook Dynamic M/T, Ion Aluminum Alloy 15x10 -4inch offset,Front winch bumper, superwinch ep9.0, 3" B/L, Torsion Crank, Chrome Bed Bar, 2 x 100 watt offroads, 6000k HID Heads/Fog(s), Pioneer H.U., 12" Jackhammer, Alpine mrp 500,train horn, whelen pa/siren
Mods
Headlight, Fog, Airbox, Blue led interior(not gauge cluster yet), blue led l/p, blue led side markers, color match skid plates
To come
sliders, suspension lift, rear bumper, tire carrier, tailgate

First clean off the transfer case spotless. Then wait and see where the leak comes from. Should be a seal. Then go to Ford and get a seal and lubricant. If you have never done this before let someone else replace it.

__________________
20O3 extended cab, 2wd, silver, 3.0, toyo spectrum tires, 10,000k HID's, 8' in bazooka tube, and UWS toolbox