Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 11-07-2010, 06:53 PM
patrick69 patrick69 is offline
2" leveling kit
 
Join Date: Nov 2010
Posts: 15
Default new clutch install ?throwout bearing

i just replaced my clutch - flywheel.. question i know have is there was a blue collar looking thing that went over the throughout bearing.. it was kinda clipped on. my original didnt have it so i took the blue thing off and installed it. clutch is slipping and pedal is spongy.. i have tried bleeding several times but its not working.. im not sure if my bleeding skills are out of wack or if its this blue thingi left out .. if anyone knows please let me know
Reply With Quote
  #2  
Old 11-09-2010, 02:47 PM
patrick69 patrick69 is offline
2" leveling kit
 
Join Date: Nov 2010
Posts: 15
Default Re: new clutch install ?throwout bearing

ok just found out it was the slave cylinder which was the problem- the transmission people said they always replace this part when they do a cluitch so if anyone out there has this problem this is your solution.. it cost me 530$$ f*#$in robbed me.. i hate when other peple touch my trucks. apparently the pressure of the new clutch will blow the seal out of the old cylinder..
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
clutch install help 04, 2.3, ASAP 04rangernyc Drivetrain Tech 1 11-01-2010 05:34 PM
Need help asap< clutch install!!!!! 04rangernyc Drivetrain Tech 3 10-31-2010 10:37 AM
clutch install diy guide elitopus Drivetrain Tech 1 08-10-2010 07:53 PM
a/c bearing replacement 3.0 Ranger_EDGE 3.0 Vulcan Tech 0 01-03-2010 08:25 PM
wheel bearing RangerLuc Suspension Tech 33 10-06-2009 10:20 AM