Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 07-11-2009, 04:15 PM
bloodhound03 bloodhound03 is offline
Learning to use the forums
 
Join Date: Jul 2009
Posts: 2
Default 1993 Ranger wont go into any gear

My clutch is working fine, I replaced the throwout and master and bled. I can see it physically moving as far as it should, however, the 93 Ford Ranger 4.0 will not go into any gear. When I had the transmission out, I turned it over to get rid of all of the fluid. Did something let loose? It is stuck in reverse, the shifter is in the correct way but will not go into any gear. Any ideas as to what I should look for inside? I am going to take the transmission out tomorrow and start looking inside.
In appreciation, Wes
Reply With Quote
  #2  
Old 07-12-2009, 12:45 PM
98blownranger 98blownranger is offline
Custom KeyChain R Me
 
Join Date: Feb 2009
Posts: 718
Default

can you try it with the motor running that will tell you if it is stuck in gear
__________________
Quote:
Originally Posted by redrumedge View Post
98blown you should be an MD! that's the same stuff my doc asks and ur spot on man!!!
98 4.0 2wd-----supercharger fully build heads cam...all show with go......3 time world of wheels champ 5 time national winner


lots of ranger parts for sale leftovers from my 94/96
96 sitting on the frame, waiting to go lower


custom billet parts by me intake adapters and billet steps for the step sides

please sign my guestbook!!
http://breyperformancemachine.shutterfly.com/
Reply With Quote
  #3  
Old 07-12-2009, 06:21 PM
bloodhound03 bloodhound03 is offline
Learning to use the forums
 
Join Date: Jul 2009
Posts: 2
Default

With the motor running it would only stay in reverse. The clutch would stop the tires but I could not shift it into any gear. I took the transmission out today and it was still stuck. I took off the top plate. I sort of reset everything to I believe neutral position and put the cover back on. It goes through the gears real smooth. I believe it is fixed. I will know tomorrow when I put it back in. I had a heck of a time bleeding the clutch master. The best thing that worked for me was to take the master cylinder bolts out and pull the cylinder into the engine compartment about a few inches. I had my son hold it up as high as possible. I had my other son pump the clutch and I bled it. This let out a ton of air that I could not get out with it mounted in the car.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
1993 ford ranger MUPH Introduce Yourself 5 07-09-2009 08:31 AM
hi or low gear scooby stew General Ford Ranger Discussion 3 06-10-2009 03:38 PM
2.3 ranger 1993 idle problems jamesp01 4-Cylinder Tech 0 05-27-2009 05:46 AM
1993 ford ranger with the quad 4? Jeremy D General Ford Ranger Discussion 1 01-01-2009 02:44 PM
how much would it cost to re gear my ford ranger? jade4881@sbcglobal.net Drivetrain Tech 1 11-27-2008 02:30 PM