Hi to all. 98 Ranger 4x4. Relpaced front hub and axle on passenger side. I need the part numbers for the plastic washer and c clip/snap ring before I put the hub back in place. These parts were
missing from work done by the previous owner. Thanks in advance, Mark

I replaced the automatic hubs on a '93 I had a few years ago. I put manual lockers instead...but, all the parts came in one package. Don't know if this is still the way they do it, but you'd prolly have to call a dealer find out if you can buy them separately. I broke both the nuts that held the hubs on and went to the dealer to get new ones and they were about $75 each (just the nuts). $150 for the nuts to put the terrible ratcheting auto hubs back on, or $210 for manual hubs and no more backing up 30 ft to unlock the hubs...I went with the manuals.
But anyway, all the hubs pieces came in one package....don't know if this helps...prolly not...sorry

__________________
2004 XLT 4.0 4x4, 3" PA body lift, 32" BFG M/Ts, Dick Cepek DC-2 wheels, Euro tailights, self-painted headlight mod, NAV/DVD/XM/iPod stereo (Pioneer AVIC-D3), Line-X, Westin step bars, AVS bug shield and window vents

Try the ford web site under support (I think). Anyway, there is a section where you can look up and order parts. You can get the part numbers there. I think www.newfordparts.com lists the part numbers as well but I'm not sure on that.

__________________
Sgtsandman's Work in Progress
2011 Ranger XLT, 4X4, 4 door Super Cab. 4.0L, 5 Speed M50D-R1HD, 3.73:1, 8.8" open differential, Jason Pace cap
2019 Ford Ranger STX FX4, Super Crew, 2.3L Ecoboost, 10 speed automatic, 3.73:1 with rear locker, Leer 100XR cap