No power
I recently swapped my 03 tremors flex fuel 3.0 to a 05 Taurus non flex fuel. Threw a bearing on 200k motor, so desired to just swap. But to the point. Engine is running excellent, other than a rough idle. When I am accelerating it seems to have no power. Engine is taching as normal, not excessively, but it seems to just have no acceleration. Also I can feel a slight vibration through the steering wheel as long as my foot is on the accelerator, when I remove it it feels silk smooth. Also when climbing up a hill it is horrible slight hills can have me going from 60 to 45. I am thinking maybe torque converter is going out? It is throwing no codes, and making no sound other then the idler pulley, going tweak tweak tweak. Also I change transmission filter before reinstalling engine, there was a bit of anti seize looking metal tar built up on the magnet in the pan. Also the brass press in bushing on the bellhousing looked kind of rough.
Sent from my SM-N920V using Tapatalk
Last edited by TheBadMud; 07-31-2019 at 11:25 AM.
|