I've been having trouble finding detailed technical drawings of the transmission where the slave cylinder and fork interface. There seems to be a bracket or casing missing (which was missing when I bought it) and I can't find the part number for it, or what goes on around it. I would also like to know if the missing part is supposed to work against the slave, because currently I can move the fork with my hand

I already have a replacement slave cylinder, but I'm not sure what else is missing. If any of you have a picture of your setup or a technical drawing, I would really appreciate it.

__________________
1983 Ford Ranger 4x4
2.3L

There needs to be a rod between the slave and the fork, the slave can push the fork to release the clutch. There needs to be a boot over the end of the slave, and a clip holds the rod to the fork, may have to hit a salvage yard.