94 Ranger 2.3 Manual Transmission stuck in Reverse
I had a very sloppy shifter so I installed new bushings in the shifter.
When I pulled the shifter lever out of the transmission I could hear something shift inside of the transmission.
When I installed the new bushings and put everything back together, the shifter was in the neutral position, but the transmission is stuck in reverse.
Any help would be greatly appreciated.
Re: 94 Ranger 2.3 Manual Transmission stuck in Reverse
Pull the shifter back out, with a light look down in the trans at the shifter mech, one rail will be out of line, using a large screwdriver, move it back in line, replace the shifter and go.