Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 06-10-2018, 04:05 PM
john09191974 john09191974 is offline
Learning to use the forums
 
Join Date: Jan 2014
Posts: 2
Default M5R1 Question

I have lost the ball out of the cluster. Anybody know where to get another one or the size of it.



----------



----------

https://www.instagram.com/p/Bj3Is-5HiWv/

Last edited by john09191974; 06-10-2018 at 04:04 PM.
Reply With Quote
  #2  
Old 06-10-2018, 05:35 PM
tomboy tomboy is offline
Ford Ranger Driver
 
Join Date: Nov 2011
Posts: 1,718
Default Re: M5R1 Question

If I'm not mistaken the one that holds the speedo gear on the output shaft is the same, if not take the cluster to Westlake or a place that has the round balls and try fit.
Reply With Quote
  #3  
Old 06-11-2018, 07:41 PM
john09191974 john09191974 is offline
Learning to use the forums
 
Join Date: Jan 2014
Posts: 2
Default Re: M5R1 Question

I measured the speedometer ball hole and the one on the cluster. They are the same size. The ball from the speedometer measured 6.35mm. So basically 1/4". Looks like sling shot steel shot will work or bicycle ball bearing.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
M5r1 rebuild 3.o problems brad75154 Drivetrain Tech 3 10-20-2016 05:38 PM
Will a 98 m5r1 work in a 93? Flyguy47 Drivetrain Tech 4 09-26-2015 07:46 PM
Want to Buy: m5r1 1st gear goofin Engine & Drivetrain Parts 0 10-20-2011 05:50 PM
m5r1 slave cylinder redneckranger69 Drivetrain Tech 0 09-07-2011 09:20 PM
Want to Buy: M5r1 brokenIN Engine & Drivetrain Parts 2 11-24-2010 02:22 PM