Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 04-05-2018, 08:29 AM
sodtoast sodtoast is offline
Learning to use the forums
 
Join Date: Sep 2011
Posts: 7
Default Abs problems please help

Abs problems maybe someone can help please
2002 3.0 edge

Brakes shudder at low mph and eventually abs light comes on. I’ve replaced both front abs sensors and the only code coming up is for the brake pressure switch. But that is for the cruise control and I’ve tested the switch and it works.
Any help is appreciated
Thanks
Reply With Quote
  #2  
Old 04-06-2018, 08:48 AM
barneycat11 barneycat11 is offline
2006 FX4
 
Join Date: Nov 2014
Posts: 389
Default Re: Abs problems please help

I had the same problem and replaced the sensors and that didn't work.Had to replace both hubs a tone ring in one of the hubs was bad causing low voltage in the right hub.If you can find a ABS code reader to find the bad hub or try to read the voltage on the sensor while rotating the tire.Reading the ABS code would be a good start.
__________________
barneycat11 2006 FX4
Reply With Quote
  #3  
Old 04-06-2018, 01:21 PM
sodtoast sodtoast is offline
Learning to use the forums
 
Join Date: Sep 2011
Posts: 7
Default Re: Abs problems please help

It did happen after I put new rotors. Tone ring is probably no good on autozone rotors. Thanks for the info. I’m going to try and change them out
Reply With Quote
  #4  
Old 04-06-2018, 02:02 PM
barneycat11 barneycat11 is offline
2006 FX4
 
Join Date: Nov 2014
Posts: 389
Default Re: Abs problems please help

The tone rings on my truck are in the bearing hubs it is a 4x4.It still would be best to get the ABS code read before changing parts.
__________________
barneycat11 2006 FX4
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
new guy with problems krazi 4-Cylinder Tech 17 07-19-2016 05:45 PM
3.0 problems HELP PLEASE 93danger 3.0 Vulcan Tech 2 12-24-2012 01:35 PM
A/C Problems PHAL23 3.0 Vulcan Tech 4 04-08-2012 06:30 AM
4x4 Problems PHAL23 Drivetrain Tech 1 04-03-2012 02:09 PM
EFI problems on the HO Airtruksrus 8-Cylinder Tech 1 07-21-2010 04:31 AM