Hey all, I've searched and can't seem to find anyone with my issue. I get all the correct lights on startup and when I turn the switch to 4wd. I also am getting the clicks from the controller module.
I have a 2001 Ranger XLT 3.0L. This Rocking Ranger has a live front axle. When I turn the knob into 4wd high, I hear the click and the light illuminates indicating 4wd high; but 4wd doesn't engage. The same thing happens for 4Low. I changed out the 4wd controller module by the passenger kickpanel and the shift motor on the transfer case and it still isn't working. While the motor was pulled off the t-case I could switch into various 4wd modes and could see the t-case motor turn. Additionally, I had someone step on the gas when it was stuck and the front drive shaft wasn't spinning out of the transfer case. Any advice for this guy? I am starting to think it's the transfer case itself.