Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 08-13-2016, 12:03 PM
OleTruck OleTruck is offline
Learning to use the forums
 
Join Date: Aug 2016
Posts: 1
Default Installed New started and now truck won't start...

Recently, I installed a new starter on my '96 Ranger because whenever I drove it between 5 - 15 mins to the local gas station and turned it off, it wouldn't turn back on. After I installed a new starter, it worked fine for a day or two, and would turn on pretty quick. But when I tried turning it on after the 4th or 5th time, it wouldn't start. Instead, it makes a grinding noise. We took out the starter and took it to a mechanic who said that it works fine and he said that something it wrong with flywheel, but I'm not so sure.

Does anyone know what could be wrong?
Reply With Quote
  #2  
Old 08-13-2016, 12:21 PM
Rangerdaddy Rangerdaddy is offline
Danger 5.0
 
Join Date: Mar 2013
Posts: 1,308
Default

Sounds like you found a flat spot in your fly wheel... If you look through the starter hole, you should be able to see the flywheel teeth. Put a socket on the crank pulley and rotate the engine looking at all the teeth. Usually turns out to be a flat spot, it's spot where all the teeth have been eaten off.
__________________
99 xlt, 5.0, torsion bars cranked, 4" body lift, 33" Goodyear Duratracs, 15x10 American racing 5 spoke rims, 2004 ranger edge seats, buggman LEDs in dash, Aussie locker in front, 8.8 with discs and mini spool in rear, blue led underglow.
Reply With Quote
  #3  
Old 08-20-2016, 08:16 PM
Andy D Andy D is offline
Ford Tough
 
Join Date: Jun 2011
Posts: 264
Default Re: Installed New started and now truck won't start...

There's starters and there's starters. There are starters that have 9 teeth on the drive gear. Others have 10. The standard trans starters are different than the A trans starters too.
__________________
"94 extended cab.4x4/ V6 pushrod 4.0? /5spd/ 600$ .rat. just bought 6/19/11 I'm a noob , teach me the true path to Ranger gooodness O wise ones.
Reply With Quote
  #4  
Old 08-21-2016, 09:24 AM
Grumpa Grumpa is offline
Busted Knuckles
 
Join Date: Mar 2016
Posts: 210
Default Re: Installed New started and now truck won't start...

Could you clarify what you mean by "wouldn't turn back on"? Did the starter engage and turn the engine but the engine wouldn't start running or the starter wouldn't turn the engine at all?
__________________
1995 Ranger XLT 3.0L OBDII
Trans: A4LD (E) 2WD
Rear: 7.5 / 3.45 NL LHD
Tires:GY P235 75/R15 (orig 225 70/R14)
Long Bed, 20 Gal Tank
Up to 225,500 miles
Reply With Quote
Reply

Tags
starter

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
i lost power on interstate, truck died then started smokeing. now it won't start themallerys4 2.9 Liter Tech 5 10-14-2015 08:54 AM
truck lost speed, shut off, then started smoking, now it wont start themallerys4 4.0 SOHC / 4.0 OHV Tech 4 04-10-2015 03:54 PM
Stereo installed, truck won't start. 1girl1 Electrical Tech 15 09-12-2010 08:30 AM
alarm won't shut off, truck won't start madamom Electrical Tech 3 04-04-2010 08:25 PM
Truck won't start in park... and won't engage into Drive Steve G. Drivetrain Tech 3 08-29-2009 06:41 PM