Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 06-09-2010, 06:01 PM
john_boi john_boi is offline
Learning to use the forums
Join Date: Jun 2009
Posts: 11
Default 4x4 not engaging properly.

Like many of you have faced, my 4x4 is only providing power to the rear wheels. I did the manual hub conversion and got the right front to connect. Here's my problem. I switched it over to 4x4 low and the side shaft is connecting to the front driveshaft. I manually pressed the left front tire hub in to connect and works. However with the front right tire when I have the hub engaged it still spins freely. The entire half shaft is spinning with it. What could cause this problem? Or is this normal?
98 Ford Ranger
4.0 V6 4x4
Bone stock
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
ABS brakes - engaging on dry pavement, no slipping CBPetrovic General Tech 13 04-28-2013 04:04 PM
clutch not engaging properly campbellpe70 Drivetrain Tech 4 12-01-2010 10:11 AM
4 wheel drive not engaging. z1mms Drivetrain Tech 1 02-14-2010 03:40 PM
Gas tank not filling properly, heater won't always turn on. utahpredator_7 General Tech 7 02-08-2010 09:32 AM
4wd not engaging 88ranger Drivetrain Tech 3 01-16-2010 11:55 AM