 |
 |
 |
|
#1
01-16-2015, 07:14 AM
|
|||
|
|||
Transmission Rebuild
Im thinking of rebuilding the transmission in my 94'. Has anyone done this before and how difficult would i be?
My plan is to grab a junk yard transmission and work on that so that i can avoid possibly screwing up my noisey but functioning transmission. Any ideas or suggestions ? 
|
 |
 |
| Register and never see these ads again. | |
|
|
|
|
|
#2
01-16-2015, 07:35 AM
|
||||
|
||||
|
__________________
97 ORIGINAL 4.0 XLT Reg Cab Manual on Manual Transfer Best truck I've ever owned.
|
|
|
|
|
|
#3
01-16-2015, 08:35 AM
|
|||
|
|||
|
Re: Transmission Rebuild
If it a standard trans, it pretty straight forward, but there are things you need to look for. Is the input and the cluster gear it runs with smooth, or has a rough feel. When buying a rebuild kit, if you need those two gears, you need the tooth count on all four gears on the cluster. Also on the rev and fifth gear, there are two different tooth counts on that sync. Other than that, just watch where things came from, and make sure they go back in the same place, nice and CLEAN.
|
|
|
 |
«
Previous Thread
|
Next Thread
»
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Transmission Rebuild Kit | gcextreme | Drivetrain Tech | 15 | 12-15-2014 01:27 PM |
| Transmission: Rebuild or New used | rcgrimes | Drivetrain Tech | 8 | 05-22-2014 08:03 PM |
| $2000 for a transmission rebuild?! | 1999RangerDanger | 4.0 SOHC / 4.0 OHV Tech | 13 | 02-08-2013 06:36 PM |
| Transmission Rebuild? | Murdok | Exterior Tech | 5 | 09-21-2011 02:32 PM |
| Rebuild Automatic Transmission | TomFox | Drivetrain Tech | 0 | 07-11-2009 04:56 PM |
|
|
 |
|
|
 |
 |
 |
