Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 10-14-2014, 07:40 PM
HerNameIsArabella HerNameIsArabella is offline
Learning to use the forums
 
Join Date: Oct 2014
Posts: 1
Default Bad Flywheel need to engage starter

So I just bought a 1986 Ranger XLT for 2k$ with 60k miles on it. It was a snowbirds car and sat around a lot so it had some issues. Little basic things that are adding up. (5k$ so far) Well this weekend I threw a few teeth on the flywheel outside of a mechanics shop, coincidentally. He looked at it, told me what it was and got it to engage allowing me to drive it home (He said he doesn't do big jobs anymore) Anyways long story short I need this thing to drive for another 2 weeks before I can get the Flywheel replaced. I know there's a trick to getting the starter to grab some good teeth to get it turned over, I just need to know how to do it? It's been a while since I've worked on an engine, I faintly remember being able to use a wrench to turn the crankshaft via the belts up front, but I don't wanna go cranking away at my engine and screw something up... and don't tell me it's a lost cause and to sell it bc I'd rather put 10k$ into this truck before I got rid of her. We've bonded.
Reply With Quote
  #2  
Old 10-15-2014, 03:26 AM
Jswifto Jswifto is offline
Ford Ranger Driver
 
Join Date: Dec 2013
Posts: 1,532
Default

There is a bolt in the center of the crankshaft. You need a socket I think it is 19 mm a little extension and a ratchet. Turn the engine clock ways just a little if you hit a bad spot it the flywheel. The flywheels on those older Rangers did that alot
__________________
1999 Ranger 4.0 and extreme Snap-on tool fetish
Reply With Quote
  #3  
Old 10-15-2014, 04:33 AM
tomboy tomboy is offline
Ford Ranger Driver
 
Join Date: Nov 2011
Posts: 1,712
Default Re: Bad Flywheel need to engage starter

Turning the engine by hand is the only way, unless you want to remove the starter, use a large screrwdriver in that hole to turn it, then reinstall the starter. And turning the engine by hand won't screw anything up.
Reply With Quote
  #4  
Old 10-15-2014, 07:54 AM
pearlkid9988 pearlkid9988 is offline
Ford Ranger Driver
 
Join Date: Jan 2012
Posts: 677
Default Re: Bad Flywheel need to engage starter

X2 spin it over with a socket and pry bar/ratchet. Our tugs at work have the 300 I6 and they grind teeth a lot sometimes depending how bad the teeth are you can run the starter a bit to get it to good enough teeth to start.
__________________
New DD-2009 Mustang GT/CS candy apple red

(For Sale)2003 XLT 5speed swap, Hurst Shifter, STX valance SLP drop coils, thunderbolt hood scoop,Screamin demon coil, Flo-pro super v, 1.8:1 Morana rockers, Roush sway bars, SCT tuned by Fred at Rogue, Taurus E-fan, 15x8 Torque thrust wheels gunmetal on chrome, Led 06 tails and smoked HID projectors, mud flap delete, painted drums/calipers, Rear flip kit.
Reply With Quote
Reply

Tags
1986, automatic, crankshaft, flywheel, starter

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
starter/flywheel issue '87 Ford Ranger V6 2.9L 1percent 2.9 Liter Tech 5 08-21-2014 08:16 PM
Starter/Flywheel Issues Baxter 4-Cylinder Tech 4 10-21-2013 03:32 AM
truck wont start, bad starter motor or bad battery? JFK4525 Electrical Tech 3 05-18-2013 10:24 AM
Starter flywheel Issue tzwicker 2.9 Liter Tech 0 07-09-2012 05:54 PM
Starter turns. Does not engage crankshaft. blueranger1801 3.0 Vulcan Tech 9 10-07-2011 02:40 AM