Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 04-18-2010, 06:57 PM
mcpowell74 mcpowell74 is offline
Learning to use the forums
 
Join Date: Apr 2010
Posts: 1
Default 91 ranger XLT manual trans.

Just bought a 91 ranger XLT with a 5 spd. When i put into reverse does nothing. If i hold in reverse location hard. truck will move. Any help would be great.
Reply With Quote
  #2  
Old 12-01-2010, 02:17 PM
johnfrankdavis johnfrankdavis is offline
Learning to use the forums
 
Join Date: Nov 2010
Posts: 7
Default Re: 91 ranger XLT manual trans.

Try bleeding the clutch described in this thread


http://www.fordrangerforum.com/drive...pert-help.html
__________________
Novice Wrench
92 Ranger Extended Cab 4X4 4 liter V6
Reply With Quote
  #3  
Old 02-03-2017, 05:04 AM
rangerandaussie rangerandaussie is offline
Learning to use the forums
 
Join Date: Jan 2017
Posts: 6
Default Re: 91 ranger XLT manual trans.

The clutch slave cylnders fail. if you remove the rubber cover on the left side of the trans you can inspect it. if its wet with fluid its bad. there is a good vid on youtube from jennies garage on changing the slave.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
03 ford ranger 4.0 manual trans 4x4 PDRRanger Drivetrain Tech 5 02-16-2010 11:48 AM
2003 ford ranger edge 3.0L manual trans issue caliedge Drivetrain Tech 0 01-29-2010 10:55 AM
92 XLT 4x4 manual trans problem mnmtl Drivetrain Tech 2 12-27-2009 09:05 PM
Want to add Cruise Control to 1997 4 cyl / manual trans rangerUte Electrical Tech 0 11-16-2009 05:48 PM
leaking manual trans BLISTERBRAIN22 Drivetrain Tech 0 09-09-2009 05:21 PM