Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 04-11-2010, 02:17 PM
D1382 D1382 is offline
Learning to use the forums
 
Join Date: Mar 2010
Posts: 3
Default was replacing my axle but i fudged up

So was in the process of changing my axle and i made the noobish mistake of rotating the axle when the pin in the middle of the diff was out. now the 2 spider gears that go in the diff popped out of place and i cant figure out how to get it back in. any help?
Reply With Quote
  #2  
Old 04-11-2010, 05:36 PM
wvcat wvcat is offline
Ford Ranger Driver
 
Join Date: Jan 2010
Posts: 836
Default Re: was replacing my axle but i fudged up

You have to put both spiders in at the same time exacly 180 across from each othe and turn them into place to line up with the pin hole...don't forget the washers...
__________________
22 and counting...
Reply With Quote
  #3  
Old 04-11-2010, 06:27 PM
fordnut71 fordnut71 is offline
Liking the Ford Ranger Forum
 
Join Date: Apr 2010
Posts: 27
Default Re: was replacing my axle but i fudged up

its a pita. when you get the 1 side in rotate the diff not the axle to get the other side in .
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
anyone replacing a headlinner? greyghost Interior Tech 4 01-27-2010 05:20 PM
replacing the engine ecu LowBlow General Tech 0 01-14-2010 12:25 AM
Replacing Fog Light(s) Flyboy Exterior Tech 3 01-13-2010 12:44 AM
replacing heads smurman 4.0 SOHC / 4.0 OHV Tech 0 11-25-2009 08:20 PM
replacing shocks demac Lifted Suspension 2 09-29-2009 09:10 AM