Re: clutch install diy guide
I just did mine, (96, 3.0 4wd 5speed) it was a fun job..... yours should be easier as you don't have the ypipe to contend with... the 4wd bits were just extra steps,, nothing tricky, I used ramps, if I have to do it again I will use jack stands....if you have any questions I will try and answer them, have been turning wrenches for close to 50 years, professionally and as a senior DIY...the only thing I have not done on a car is rebuild an auto trans... just have not needed to.....like manual boxes better.. easier to work on if neccessar, also don't need jumper cables..... LOL
|