Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 04-04-2010, 01:48 PM
elitopus elitopus is offline
Learning to use the forums
 
Join Date: Apr 2010
Posts: 1
Default clutch install diy guide

Im going to be installing a new clutch in my wifes 97 ranger 2.3L. Does anyone know of a diy thread with pictures? I had a service manual but but have misplaced it. Thanks
Reply With Quote
  #2  
Old 08-10-2010, 07:53 PM
capnfred capnfred is offline
Liking the Ford Ranger Forum
 
Join Date: Jul 2010
Posts: 19
Default Re: clutch install diy guide

I just did mine, (96, 3.0 4wd 5speed) it was a fun job..... yours should be easier as you don't have the ypipe to contend with... the 4wd bits were just extra steps,, nothing tricky, I used ramps, if I have to do it again I will use jack stands....if you have any questions I will try and answer them, have been turning wrenches for close to 50 years, professionally and as a senior DIY...the only thing I have not done on a car is rebuild an auto trans... just have not needed to.....like manual boxes better.. easier to work on if neccessar, also don't need jumper cables..... LOL
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Discuss How-To: OHC Install mossyoak03 How-To Submissions 713 05-23-2017 07:20 PM
Guide to interior painting! 02BlueRanger Interior Tech 6 04-04-2011 12:17 AM
Tire and Gear Ratio Guide STL Wheels and Tires 5 12-12-2009 07:25 AM
How-To: OHC Install mossyoak03 Interior Guides 0 09-23-2009 08:09 AM
2010 Ranger order guide STL General Ford Ranger Discussion 13 07-28-2009 12:05 PM