Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 03-23-2010, 07:28 PM
F4fixer F4fixer is offline
Learning to use the forums
 
Join Date: Sep 2009
Posts: 10
Default Valve body

Does anyone know where i can get some alignment pins or what the dimensions are so i can make some.I need them to align the gasket on the valve body.Ford wants 45 for just one and of course they are two different sizes.Any help would be greatful.Hopefully i can make some.

Last edited by F4fixer; 03-24-2010 at 10:34 AM.
Reply With Quote
  #2  
Old 03-27-2010, 10:15 AM
F4fixer F4fixer is offline
Learning to use the forums
 
Join Date: Sep 2009
Posts: 10
Default Re: Valve body

Never mind you can use m6x55 bolts.Just cut the heads off and taper then make a notch for the screwdriver,It's the poor man alignment pin or go pay 50 bucks and thats just for one I don't think so.Have a Nice Day.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
pcv valve? hermy 3.0 Vulcan Tech 15 07-19-2014 05:29 AM
EGR Valve Location hulon131 2.9 Liter Tech 11 05-21-2012 02:58 PM
PCV valve location on 2.5? twinjetguy 4-Cylinder Tech 5 11-18-2009 09:35 AM
Valve Tapping oranjeff 4-Cylinder Tech 3 10-19-2009 06:47 PM
PCV valve? RandSand 4.0 SOHC / 4.0 OHV Tech 10 10-15-2009 05:14 AM