Conversation Between Chopper Hardtail Guy and DrIftKi7Vg
Showing Visitor Messages 1 to 3 of 3
-
That's the thing, I did switch the wires around. There's a white wire in the middle of the blue connector, and a brown on the right and a another on the left, I think the white is ground, (please correct me if I'm wrong) well the bulbs would be in highbeam location with my low beam switch on...and would only move if I Just hit the "flash to pass" lever, but if I pushed the high beam lever, the bulb wouldn't move...
I then switched the left and right wires and then the low beam function was the only thing I had.
I'm perplexed. WHat did you do?
-
I don't know where you found that at but my bi xenons work in my truck. You need to switch around the wires found on the blue connector plug on the relay harness that was included with your HID kit.
-
I read that you had bi xenons but they didn't work right...mine, too! I've installed many kits, and my own truck didn't work with it.