Conversation Between cheeba and 02RangerFX4
Showing Visitor Messages 1 to 7 of 7
-
-
-
Alright, i'll make sure of that. Ive had the dash apart a few times so it shouldn't be a problem.
Im going to use POR-15 for the undercoating. Supposed to be good stuff.
It should be for almost 150$ a gallon...
-
no problems with wires. but if you take out the dash make sure everything is hooked back up correctly. my heat only comes out of my defrost (im not worried about it) and dont cheap out on the undercoat. i got cheaper stuff and it was flaking off before i even drove it
-
Ok that's what i was going to get at XD Did you have and problems with taking off wires?
Need to make sure i can get everything back on.
Im going to undercoat the entier underneath of the truck (including the cab and bed)
-
not too hard if you have power tools and time to do it. theres only 6 bolts holding the cab down. but you have to take alot of shit out of the engine bay and wire connections. if i had to do it again it would prolly take me about a weekend or so
-
How easy was it to take off the cab?