Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Conversation Between GaRanger03 and SB03Ranger
Showing Visitor Messages 1 to 9 of 9
  1. SB03Ranger
    10-23-2011 06:19 PM
    SB03Ranger
    there is two bolts on each side of the brush guard. one mounts to the side of the frame, the other goes on the bumper bracket. I had to measure out 3inches due to the body lift and drill new holes on the brushguard so it would be level? no pics of it
  2. GaRanger03
    10-23-2011 05:27 AM
    GaRanger03
    My truck in leveled on 31s.
  3. SB03Ranger
    10-20-2011 08:42 PM
    SB03Ranger
    is your truck lifted man? prety self explainatory. just two bolts?
  4. GaRanger03
    10-20-2011 07:15 PM
    GaRanger03
    hey man i was wondering if u had any pics of how u installed the mounting brackets for the brush guard. i just picked one up off craigslist and needed some help instaaling it on my truck
  5. SB03Ranger
    05-27-2011 08:42 PM
    SB03Ranger
    naw man i dont. they ran out from behind each wheel. tips on each side turned out. ive since cut them off and only have one infront of the wheel. my pipes were hitn the frame so had to cut them.
  6. GaRanger03
    05-27-2011 05:55 PM
    GaRanger03
    Do u have any pics of how u ran the pipe for ur duals
  7. SB03Ranger
    04-21-2011 09:15 PM
    SB03Ranger
    idk how that will hold up lol. i got my pipe from a scrap yard 22 bucks for 25ft. way to much i onlused about 12ft. Get some pics up of your truck on here
  8. GaRanger03
    04-21-2011 08:09 PM
    GaRanger03
    I made a roll bar today out of 2 inch PVC and I painted it black. I put 2 hella 500s on it also.
  9. SB03Ranger
    04-20-2011 06:27 PM
    SB03Ranger
    Hey i built the roll bar myself. prolly only $60 in it myself. my dad got me the lights for xmas they are 65 bucks on ebay. it was easieer than i imangend