Method i use is simple.

Run the engine for a few minutes to warm all the crud up, then spray the whole lot with Autoglym bug and tar remover



Put it in a spray bottle and dilute if you like, but keep it away from your skin as it burns like hell!!

Get an alloy wheel brush or a large paint brush, even a soft bristle broom head if you like and aggravate the whole lot, keep spraying and brushing, just be sure your hands are protected with some rubber gloves.
The dirt, oil, and grime should be melting away at this point and dripping all over your drive way....lol

Next just get your hose and set it to sprinkler mode, and rinse it all away.
Don't use a jet washer because in my experience these things tend to force water into electrics and plugs.
Take the car for a spin to rid of of any other water sitting about, then dry off with a rag.
Next spray the lot with WD40 to coat it all in a nice shiny lube, and to condition all the rubbers and protect the aluminum bits and bobs.

Shut the hood, then start on the outside of the car, as it will have residue of WD40 on the paint and screen, when your done it will love you forever!





This is my Subaru WRX that i sold 3 months ago when i bought my ranger, this was the state of the engine when it was delivered, and the cleaned result if just 30 mins later and a blast round the block to dry it off.


Before:






After:

__________________
==========================
Knowledge is often mistaken for intelligence. This is like mistaking a cup of milk for a cow.


2006 UK Ranger Wildtrak Double Cab 4x4/2x4 2.5Td, Titanium Grey, tinted windows, Blacked out Rear, rear sjs hard cover, sportz Blue bulbs, LED side lights, BFG KM2 MT - 31/10.5/15's

Wow the difference is amazing

__________________
2006 Ford Ranger Sport 4.0 2WD on 32x11.50R15s
-3" Doetsch Spindle Lift


Using the forum:
How to Post on the Forum
Creating a signature (do this before asking any questions)
Upload an Avatar (image of your Ranger)
How to Post Pictures on the Forum
Switch the site layout: Light Theme or Dark Theme

Things to do:
Participate in Truck of the Month
Participate in the Ranger Photo Contest
Participate in the Non-Automotive Photo Contest
Become a Site Contributor
Shop at the FordRangerForum.com Store

Whoa! - you really need to do a FMIC and a TGV delete for that engine!

__________________
Looking for a professional retrofitter to add HIDs or LEDs to your Ranger? PM me if your looking to have work done, and have cash to spend.

Thats awesome man. i almost cant believe thats the same car. I just use tire wet on the under hood of my ranger...but im sure that works a heck of a lot better.

where can you purchase this product?

__________________

x2

__________________

My Build Thread!!!

Only contact info I could find for North America:

http://www.autoglym.com/enGB/Trade-Distributor.asp

__________________
Sold:2004 XLT 4x2 Ext. Cab. 3.0 Mods: 3" spindle, AAL, shackle, 32x11.5 on 15x8s, billet grille, clear corners, flow 40 dumped, line-x, CB/PA, traction bars, lil sound system, auto up down windows
Sold:2005 XLT 4x4 Ext. Cab. 4.0 Mods: ProComp lights w/ HID swap on tabs, 32x11.5 on 15x8s, CB/PA, black out heads/corners, lil sound system, cranked t-bars, flow 40 dumped, line-x, shell, bed rug, 06+ tails, metal tail gate handle since plastic one shattered, OHC, Mustang Dome.

Cheers

You should be able to pick this stuff up of eBay, you guys get autoglym products so anywhere that sells autoglym should be able to supply it.
Works great with little effort which is always a good thing!
Here in the UK we have Wynns Alloy Wheel cleaner that will work just as good.
Any acid based alloy wheel cleaner will work.
Just make sure you rinse it all off within 5-10 mins and keep it wet so it comes off easy :-)

__________________
==========================
Knowledge is often mistaken for intelligence. This is like mistaking a cup of milk for a cow.


2006 UK Ranger Wildtrak Double Cab 4x4/2x4 2.5Td, Titanium Grey, tinted windows, Blacked out Rear, rear sjs hard cover, sportz Blue bulbs, LED side lights, BFG KM2 MT - 31/10.5/15's

Would you recommend this for older model trucks as well? cuz it'd be bitchin to have an engine compartment that clean

__________________
1987 Ranger - Totally Stock... for now...

Completely inept... for now...

I am now going to clean my engine bay

__________________

great job man! looks brand new! the only thing I would add is before you start on your engine, I would hose down your fender/bumper/wiper cowl, etc, anything around the engine and keep it wet. That way if you do get some degreaser on your paint, it won't damage it right away, and simply rinse those same panels as you're rinsing your engine.

__________________

Thats an awesome job!! Thanks for the tip!

wow i just take it to da carwash