i got a reg cab where shouild i ground my amp out to? ive had it ground out to the seat bolt without cleaning the bolt off but where should i ground it out to?

__________________
08 Ford Ranger 2.3l

That should be fine.. but maybe clean the bolt so it has a good solid contact to the metal

__________________

1998 Ranger Extended Cab

3.0L 5sp Manual, 4x4

American Racing Rims

31x10.5x15 BFG AT

3" Body Lift

Seat bolt is fine...but its not a problem if u scratch some paint off under the carpet and use some self tapping screws either.

__________________
~-SOLD-~
04' Edge 6 Cyl 3.0 5 Speed Manual 107K Miles
3" Body Lift - 33" All Terrain Tires
Drop In K&N Filter - Flowmaster - XM Commander Satellite Radio

actually a seat bolt can cause problems... look at it this way.. The threaded receptical for the bolt is welded to the floor of the truck. Grounding anything through a pre-exisiting bolt can add unwanted resistance. Just find a flat spot under your carpet... sand it down to bare metal... make sure there is nothing on the underside of the location you chose.. and use a star washer and a self tapping screw.. An actual bolt an nut would be best if you can swing it. And to prevent corosion.. cover the ground location after it is secure with vasoline.