Hey guys, ill be doing a full blow through in my 99 this week! Im using 2 Audioque sdc 2.5 12's on a audiopipe 1500 running at 1 ohm. The box will be 6.0 cu.ft. and slot ported into the cab. ill put pics up soon

Cool beans and awesome sauce. I think blowthroughs are pretty cool. Looking forward to the pics!

FRF for iOS

__________________

sweet I wanna see pics

__________________
GOLDIE
1999 2.5L XLT
Herculiner | Kobalt tool box | K&N Filter | 6k HID's | 31's BFG | Eagle Alloy 186s | 102'' Whip | Cobra 19 DX IV | Fabtech 3.5 Spindles | Pro Comp AAL kit | 15% Tint | Mustang Dome

I built the box today. It took 7 hours! It was too dark to take a picture of the finished product but i still have to coat the box in resin tomorrow. And hopefully have it all in a playing Monday night. But here's some pics.

ForumRunner_20120819_012212.jpg



ForumRunner_20120819_012235.jpg

Have you cut into the cab yet?

FRF for iOS

__________________

Nah, I just painted the box in resin. Im trying to avoid a bed cover. When its all dry, im going to use roll on bedliner to cover the box and the bed. So when ever all that gets done ill start cutting.

Really hope that is 6 cubes gross, not 6 cubes net. 6 net would be pretty big for a pair of 12's.

How big is your cutout going to be? A blowthrough is a good opportunity to go bandpass, and it keeps the cut size small. Be sure to post plenty of pics and videos when it's done, I'll be tuned in.

__________________

What do you do about cab/box flex... J/W

__________________
Ball Joints/Upper A-Arms How To
Replace Door pin/bushing
Repair broken dome light tabs
VIDEO OHC Install

The 6 cubes was before sub and port displacement. But the box well be bolted to the bed through the bottom of the box with 2,6 inch threaded rods. And im using a slider to slider accordion seal to bridge the gap between the cab and the bed. On the inside, im going to build a wall with a cubbie like slot to go in the cutout hole so it will cover up the seal and thats what im going to mount my amps to.

Here is my cut out diagram. The inner most oval like shape will be cut out.

ForumRunner_20120820_161352.jpg

Box is painting in 3 coats of rhino liner. Should be in tonight!!!

ForumRunner_20120825_150410.jpg

Pain in the ass...

ForumRunner_20120825_192836.jpg

How long did it take you to cut it out, and what did you use to cut with. Are you glad you did?

__________________
92 Xlt 5 sp. modified exhaust and a lot of TLC

I used a cutting wheel on a tool that looks like a dremel but it runs on air. But the air compressor was too small and It took and hour to cut the bed out. I used a jig saw on the cab. And yes im very happy with it! Its slams even on break in. I will turn the amp up this Saturday so It will be running the full 1500 watts.

Here are some pics. I still have to build the wall in the back and and hide all the wires. And that voltage is with the truck off. I have 14.2V with the truck running

ForumRunner_20120828_164322.jpg



ForumRunner_20120828_164304.jpg



ForumRunner_20120828_164247.jpg