Okay this is my first post. i was wondering if anybody had heard of or tried putting say a 10 inch sub in between the seats. Maybe cut out the arm rest and run a box from the bottom and angle it up, similar to the picture. And where could I get a box like that?

I take it you have a regular cab truck , if you want the sub between the seats it os going to have to be a totally custom fiberglass box to get the woofer to fit . You may even have to go to bucket seats

__________________
2003 Ranger totally stock for now ,mods coming soon .
SOLD 1996 Mazda B3000

I would just use the entire bed as a enclosure and put 10- 14" subs there and turn it up till all the nuts and bolts came loose on the truck...

__________________
2011 Ranger XLT 2x4,4.0 SOHC, 5 Speed Auto, 3.55 Rear. Oxford White.

Simplicity is the ultimate sophistication.

Torque it down till it breaks off, then back it off 1/4 turn.

now that I can see the picture ,like I said it is a custom job .

__________________
2003 Ranger totally stock for now ,mods coming soon .
SOLD 1996 Mazda B3000

If I remember right my ex had it between his seats... I'm sure he built the box but I'll see what info I can scrounge up for you

__________________
2008 XLT 4x4 - GRABBER ORANGE - 4.0 V6 - 5 spd
PNW CREW

My buddy had a bench seat in his Ranger(still has it). He had a 10" sub, in a very regular sized box, just chillin in the middle of the seats? Custom..no way. It just sat there, worked well, and sounded great. I'm sure its not that hard to do..

__________________

Project Log: Brads 2004 Ranger

I've done it with both a 10" and 12" sub. Just use a truck box and invert mount the sub (magnet out). I took out the arm rest and just have the sub there.
Here's what I've done. If you want other pictures to get some ideas I can try and dig some up
Can you a shallow mount sub and keep the arm rest


10" sub with arm rest out.
[IMG][/IMG]

12" sub armrest out
[IMG][/IMG]

__________________
Alpine cde 9874 h/u
Alpine type s (rear) type r (front) 6x8 coax
2 Selenium 6" midbasses, 2 Selenium Super Tweeters
Alpine ktp-445 (doors), Alpine mrx-m100 (sub) 1000w @2ohm, RF P400-4 (Seleniums)
Fi q 12" sealed boxed ~1.1^3 ft box, polyfil stuffed

Thanks for all the ideas. Well what I was planning on doing was removing the driver seat and replacing it with a regular bucket seat with no arm rest, then have the box run up from in front of the shifter to an angle near the back, up to just below the window in an L shape.