I need some pictures on where to hook everything up for the " big 3 upgrade ", if you guys can help me out with where you connected everything and where you ran your wires. That would be awesome

__________________
1997 ext cab STX 4.0L 4x4
3 inch body lift withwith BFG all terrain's
Kenwood headunit, kicker 6x8 speakers all around, and 2 12" rockford P3's with a 900 watt rms amp.
35w 8000k HID headlights
projector fogs with 8000k HID's
warn manual hubs

Charge wire from alternator to battery:





----------

And my new battery.

Youll want to run a nice ground from the battery to the frame. Hit the frame with a grinder and use a SS bolt. Then, from Engine to frame.

__________________
Ball Joints/Upper A-Arms How To
Replace Door pin/bushing
Repair broken dome light tabs
VIDEO OHC Install

Where did you hook the ground on the engine?

__________________
1997 ext cab STX 4.0L 4x4
3 inch body lift withwith BFG all terrain's
Kenwood headunit, kicker 6x8 speakers all around, and 2 12" rockford P3's with a 900 watt rms amp.
35w 8000k HID headlights
projector fogs with 8000k HID's
warn manual hubs

You can put it from the alt. or a/c pump brackets.

__________________
Ball Joints/Upper A-Arms How To
Replace Door pin/bushing
Repair broken dome light tabs
VIDEO OHC Install

Look here
http://www.rangerpowersports.com/for...em-261997.html

__________________

98 Ranger some stuff done

PNW Crew

Okay cool, thanks pooleo. Oh and any idea how much wire to get? I was thinkin like 8-10'? How much did the wire run ya?

__________________
1997 ext cab STX 4.0L 4x4
3 inch body lift withwith BFG all terrain's
Kenwood headunit, kicker 6x8 speakers all around, and 2 12" rockford P3's with a 900 watt rms amp.
35w 8000k HID headlights
projector fogs with 8000k HID's
warn manual hubs

I have gotten wire from a local audio shop for like $1 something a foot.

__________________
Ball Joints/Upper A-Arms How To
Replace Door pin/bushing
Repair broken dome light tabs
VIDEO OHC Install

Big 3 Upgrade is battery + to alternator +, battery - to chassis ground, engine ground (alternator mounting bolt) to chassis ground. 1/0 stranded copper cable. You can follow the factory wiring and there is no need to remove it.