Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 02-07-2012, 05:08 PM
COL COL is offline
Ford Tough
Join Date: Jan 2012
Posts: 307
Default Amp Installation

I am currently working on installing a sub, amp, and aftermarket deck into my ranger. I mounted my amp, installed my sub, and ran my RCA wires, but where is the best place to run the power wire and install the amp ground? Also what company makes the best install kit for the single din deck? Truck is a 2000 Ford Ranger Extended Cab 3.0L Auto.
Reply With Quote
Old 02-07-2012, 05:28 PM
STL STL is offline

Join Date: May 2009
Posts: 23,398
Default Re: Amp Installation

You can run the power wire through the firewall. There are existing holes you can thread it through.

Also wouldn't it be easier to create a signature so you dont have to always type out the trucks info?
2005 Edge

Reply With Quote
Old 02-07-2012, 05:35 PM
doyouquaxu doyouquaxu is offline
Almost ******
Join Date: Mar 2011
Posts: 7,480
Default Re: Amp Installation

my power is through the fire wall then down the kick panel and under the carpet. amp ground is from the amp under the carpet to the seat bracket bolt.
Why does everyone think prerunners just jump stuff?

Please click HERE to watch this video!
Reply With Quote
Old 02-07-2012, 06:01 PM
1madRanger 1madRanger is offline
Testing... never fails.
Join Date: Jan 2012
Posts: 193
Default Re: Amp Installation

1995 Ford Ranger XLT- Project #27
Reply With Quote
Old 02-08-2012, 02:51 AM
GLH GLH is offline
Ford Ranger Driver
Join Date: Oct 2011
Posts: 8,818
Default Re: Amp Installation

Yes, the seat bracket bolt will work fine, usually, if the ground wire is large enough and not longer than 18". You can take a battery terminal cleaning brush and try to clean out the bolt hole and also take a wire brush to the bolt threads and to the underside of the bolt head and to the seat bracket where the bolt sits and just make sure it is clean unpainted metal to metal contact for the entire connection.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Need an installation kit mako427 Audio / Video 2 10-20-2011 11:39 AM
Tie rod installation jimspinnin Suspension Tech 4 07-27-2011 05:47 PM
OHC Installation Cherobeast Interior Tech 6 03-08-2011 10:24 AM
2010 ranger xl stereo installation dash kit installation question.... 2010 Audio / Video 3 11-14-2010 09:17 PM
Fog lights installation wcasta Exterior Tech 0 08-11-2010 08:05 AM