|
02-05-2012, 01:01 PM
|
Remember The Veterans
|
|
Join Date: Nov 2011
Posts: 84
|
|
Thanks for the info
Just wanted to say thanks for all the input found here. I had to pause a couple of times due to the language barrier / generation gap. IE. in my day if something was "sick" that was not a good thing. But just going through the various threads I found the information I needed.
Just old guy replacing old speakers.
Thanks
Chris Sr.
__________________
79 USN 04
2000 XLT Supercab 4X4 NOT lifted. Original owner.
After 12 years it is time to freshen it up, so... Manual hubs, Upper & lower ball joints, tie rods, shocks, rotors, ham & cb radios, door edge lights, flashing center brake light, OHC, throttle cable mod, 3rd brake light & corner turn signal mod more to follow.
|
Register and never see these ads again. |
|
02-06-2012, 03:26 AM
|
Ford Ranger Driver
|
|
Join Date: Oct 2011
Posts: 8,818
|
|
Re: Thanks for the info
Quote:
Originally Posted by CLToppingSr
Just wanted to say thanks for all the input found here. I had to pause a couple of times due to the language barrier / generation gap. IE. in my day if something was "sick" that was not a good thing. But just going through the various threads I found the information I needed.
Just old guy replacing old speakers.
Thanks
Chris Sr.
|
Thank you, Sir, for your service to our Country.
Sooo ... What did you end up going with for speakers ?
|
02-06-2012, 12:13 PM
|
Remember The Veterans
|
|
Join Date: Nov 2011
Posts: 84
|
|
Re: Thanks for the info
Pioneer TS-A6874R front and rear. but first I need to add some sound deadening material. As long as I have everything apart I like to do it right the first time when I can.
Now I just need to figure out which type to use and the best place to get it. From what I have read, that stuff is not cheap.
Chris
__________________
79 USN 04
2000 XLT Supercab 4X4 NOT lifted. Original owner.
After 12 years it is time to freshen it up, so... Manual hubs, Upper & lower ball joints, tie rods, shocks, rotors, ham & cb radios, door edge lights, flashing center brake light, OHC, throttle cable mod, 3rd brake light & corner turn signal mod more to follow.
|
02-06-2012, 12:19 PM
|
|
Testing... never fails.
|
|
Join Date: Jan 2012
Posts: 195
|
|
Re: Thanks for the info
For just the speaker housings or do you wanna do the whole truck?!
If its just for the housings... spot shipping and Ill throw you some of our scrap Dynamat your way.
__________________
1995 Ford Ranger XLT- Project #27
|
02-06-2012, 12:42 PM
|
Remember The Veterans
|
|
Join Date: Nov 2011
Posts: 84
|
|
Re: Thanks for the info
Can't argue with that offer. I'll pm as soon as I remember how.
Thanks
__________________
79 USN 04
2000 XLT Supercab 4X4 NOT lifted. Original owner.
After 12 years it is time to freshen it up, so... Manual hubs, Upper & lower ball joints, tie rods, shocks, rotors, ham & cb radios, door edge lights, flashing center brake light, OHC, throttle cable mod, 3rd brake light & corner turn signal mod more to follow.
|
02-06-2012, 04:18 PM
|
Ford Ranger Driver
|
|
Join Date: Oct 2011
Posts: 8,818
|
|
Re: Thanks for the info
Quote:
Originally Posted by 1madRanger
For just the speaker housings or do you wanna do the whole truck?!
If its just for the housings... spot shipping and Ill throw you some of our scrap Dynamat your way.
|
Top-Notch Man !
|
Thread Tools |
Search this Thread |
|
|
|
|