hey i have an extended cab 98 ranger and i have a mrp m500 amp, and im lookin for a two sub setup that will match perfectly watt wise and let me keep at least one of my jump seats usable. and i have a pullout cover thing in the extended part, which i have never seen before i got this truck, but i would want to be able to use it too (hides whats in my floor)
any ideas will help, thanks

I have a single 10 setup with that same amp, but have also had 2 mtx jackhammers in there (whole back seat was not useable) If you want to keep one seat, I'd say look at my pics and you can see where i mounted the amp. I'd say put the subs behind the driver seat. Maybe 2 10" type r's if you want wired in parallel 2ohm? I know right now if i get a ported box for my type r it will be enough with just the single 10.

__________________
2003 Ranger FX4, Alpine 10" type R, alpine deck,amp, and speakers, Fog light mod, Hella's behind the grill with dual fog switches in bezel.

alright im fixin to take a look at ur pics, but i already have the amp under the passenger seat and thats not a problem. and i already have them installed but i thought that since im the one that would be gettin in and out and using it for storage i put the subs more on the passenger side so i could use that jump seat and storage on the driver side, also cuz thats where the amp is (pass. side).

but what do you know about sound ordnance? crutchfield has a dual sub bandpass box with 2 sound ordnance subs, with 500 watts rms, but i think it said somethin like they are 4 ohm together, so id only get 300 watts from amp i think