 |
 |
 |
|
#1
03-23-2011, 12:26 PM
|
|||
|
|||
Help help help!
okay i ordered this subwoofer box because... you have really only two options find a custom built box orrrr build yourself one for the standard cab rangers. so anyways i ordered this box, come to find out my 12" sub seems to be to big, well the box isnt deep enough so the top of the sub sticks out a little bit:\ is there anything i can do to fill this gap or anything at all? let me know pleaaase!
oh an dont mind that i have the box sitting in a suburban 
__________________
1996 Ranger 5 speed standard cab Last edited by kwaynepotter; 03-23-2011 at 01:47 PM. 
|
 |
 |
| Register and never see these ads again. | |
|
|
|
|
|
#2
03-23-2011, 07:55 PM
|
||||
|
||||
Re: Help help help!
You can cut a spacer ring from plywood then paint it.
__________________
2006 4.0 5 spd auto 4x4 Super Cab BF Goodrich Commercial Traction T/A's Royal Purple Throughout Alpine Head Unit with some Infinity Noisy Stuff  NW Oregon
|
|
|
|
|
|
#3
03-23-2011, 08:09 PM
|
|||
|
|||
|
Re: Help help help!
thank youh!
__________________
1996 Ranger 5 speed standard cab
|
|
|
|
|
|
#5
03-23-2011, 08:15 PM
|
||||
|
||||
|
Re: Help help help!
that or cut the back out and attach another board behind it. just make sure it seals tight and wont rattle.
__________________
99 extended cab, 4.0, auto, 33s, 4x4 lifted with some stuff done 98 2wd 2.5, 5 speed, dropped with some stuff done
|
|
|
|
|
|
#6
03-24-2011, 06:48 PM
|
||||
|
||||
|
Re: Help help help!
i would cut the spacer ring and make sure to epoxy the ring to the box to ensure a good seal...painting the ring would definetly make it look cleaner....use mdf
__________________
2004 Ford Ranger Xlt 2wd 4 door 4.0 liter V6 engine (all stock) Delta toolbox in the bed
|
|
|
 |
|
|
 |
 |
 |
